192.168.1.2 IP address is one of the defaults and private IP address widely used in the home broadband routers and access points. When you use the 192.168.1.2 IP address to connect to the router, first of all you have to use the address on the local network. In order to log on to the router, first of all you have to open the web browser and type http://192.168.1.2 in the address bar. Nowadays, there are lots of device manufacturers are using this address as default IP on their router devices such as Philips, D-Links and Net gear and so on. However, you can be used to set this address on only one device and does not be used on multiple devices because it causes the address conflicts.
The 192.168.1.2 is a private internet protocol version 4 network address that allows you to connect to the router. With this IP address, you can connect the device inside the local network and cannot be accessed from outside the home network. If you want to use it outside, you just use the public IP address for your router. If you are an expert, you can easily modify the router’s settings frequently that require enough talent and knowledge. Taken from : 19216812.org
How to access the IP address of 192.168.1.2?
Nowadays, millions of devices are using this default IP address by default on their network devices. It is very simple and easy to use that helps a person to change their router’s username and password or even trouble shoot the networking problems as well. However, a few of these default IP addresses are common and similar to access in the same way and it only works on the local networks for both access points and routers. When it comes to the modem management control panel, you just simply login to http://192.168.1.2 in order to achieve the fully qualified.
First of all, you can type the IP address into the web browser’s address bar manually or just copy and paste it by clicking on the button to your site. In such a case, most of the users can wrongly enter the passwords and do not login to it. Even some people can forget and don’t know the username and password. One of the best solutions for this problem is just reset your router device and set the default modem passwords.
How does it work?
For certain types of IP address, the 192.168.2.1 can be used as the default address location for the device. It allows the users to make changes in their settings of the routers as well as access points. If you want to enable any internet device on the local network, you should be assigned only one device with this specific IP address at once. In order to avoid the address conflicts, you should not use the same address on multiple networks as well as outside the network rather then you just connect to a single router device. For outside connection, you must use the public router IP address.
