As soap crafters, there are hundreds of variances allotted to us that allow our soaps to be special. Maybe it is the combination of oils in your recipe, the process to which you soap, your unique scents, your particular decorating method, or really any number of things that makes your soap exclusive. Well, in this blog post, we are going to throw a new option into the mix.
To insulate or not to insulate that is the question.
As with many aspects of soap making; when it comes to insulation, it is really a personal preference.
Being new to soap making, a lot of research is involved. You read, read, and read some more in order to learn everything you can about soap making. Well, as many of us found, insulating is always advised.
The insulating step involves taking your freshly poured, molded soap, and surrounding it with layers. These layers help to keep the soap at an even heat while the batter goes through the saponification process. During the saponification process, as the lye reacts with the various soap making ingredients, soap (and glycerin) is produced. The process itself is an endothermic reaction, meaning that it absorbs heat from the surroundings.
This “heat stage” of soap making is commonly called the gel phase. During the gel phase, saponification works at an accelerated rate, hardening the fats of your recipe. This phase will also be the time where any discoloration of ingredients or colorants will occur from the heat.
Keeping the soap uniformly heated will prevent a partial gel from occurring. Not keeping the soap uniformly heated allows for the soap that is in the center of the mold to stay hot, while the soap on the outside loses heat rapidly. And, since the saponification process is endothermic, it needs to be able to draw heat from its surroundings. What this results in is an off colored look in the center of your soap, usually in an oval like shape. This shows that the center of the soap gelled, and the outside of the soap never reached gel phase.
Speaking in terms of soap, gel phase or not reaching gel phase does not harm the soap itself. The soap will still function after cure; it is only an aesthetic issue. So, it is for this reason that it is often believed that insulation is vital to an amazing looking bar of cold process soap. But, there is an alternative.
Lets look at the flip side. If you do not want to insulate the heat in the soap, what would happen if you chilled the soap instead?
Chilling your molded soap would prevent the gel phase from occurring. This would be a handy trick of the trade for a few reasons. It should however, be noted though that in order for the gel phase prevention to occur, you need to be able to control the area. Operating out of a loaf mold for example, still allows enough soap in the middle for a partial gel to occur. You want to keep the size of the soap easily manageable for temperature reasons. Remember, because saponification deals with heat, while the lye and fats are reacting, heat will be present. To completely increase your chances of preventing the gel phase, you must minimize the area that needs chilled, aka use smaller molds.
Not insulating your soap, and instead placing your freshly molded soap into the fridge or freezer for 24 hours will help to prevent the gel phase from occurring. But, please note the size of your soap will directly determine whether the gel phase will occur or not. This also rings true for the soaping ingredients that are in your recipe. Chilling your soap is not a guarantee, partial gelling can still transpire.
In closing, there is another option if you choose not to insulate your soap. There are benefits and drawbacks to chilling your soap. Stay tuned for a future blog posts discussing preventing gel phase and what the outcome will be.
