Home Magazine

DIY Frends Headphones

By Dreamcreate @THEdreamcreate


I’m awkward, painfully awkward sometimes. When I have my earbuds in and people try to talk to me… triple the awkward. I knew I should probably buy myself some headphones to limit such encounters and to wear during travel, but the only cool ones I could find by FRENDS cost $260-ish and I have a ton of more important things to spend $230 on.
DIY time!

Tools Needed

headphones - found mine at Future shop for $25
krazy glue / rose gold or copper spray paint / scissors
clear vinyl – I went to my local industrial plastics store and they cut me a few feet for about $5. I chose this material because it’s durable and water resistant. If you can’t find any I recommend any sturdy plastic-like material.

1 / Cut a circular piece of vinyl (mine was 2 inches in diameter and fit perfectly). Make a single cut from the outside to the center and overlap the edges until you get a very shallow cone shape. Krazy glue your cone in place. Try your cones on your headphones, trim any excess vinyl until the cones fit perfectly.

2 / Apply thin layers of rose gold paint to the cones until completely opaque. I did 4 thin coats of paint. Let the paint dry for a few hours.

3 / Apply a generous ring of Krazy glue around the edge of your headphones and place your cone on-top. The glue will dry in about 10 seconds, so make any adjustments quickly.

 And we’re done!


 This took me a few hours including paint drying time, but only about 10 minutes of actual work. It cost me about $35 to make, although I keep most of these supplies on hand so I only had to purchase the headphones.


These awesome headphones went with my on vacation and totally survived rough baggage handling and sharing limited space with everything else I own. I also took my last DIY, the Chanel Espadrilles with me and they were another hit, keeping me comfy through airport travel.

So, I’d love to know what you guys think of this DIY?

Leave me a comment, or say hi on instagram!


Back to Featured Articles on Logo Paperblog