The water level controller is a device which can monitor the water level of the tank and can avoid unnecessary wastage of water. The device can be used in all field where the water tank is placed like home, office and in any industrial places. A small device but works a much more than its size.
1. Fully Automatic Water Level Controller with Indicator & Up and Down Tank Sensor
The device control both underground and overhead tank easily and efficiently. It can be work with any single phase motor work with MCB switch type Starter for home, office, hospital, and restaurant. There is no manpower require to operate the machine, though its designed an automatic sensor and with 2HP capacity. The device is made for long lasting and no mechanical system, so it can over heat and dry running. The device is maximum weight of 1.17kg.
2. Mivan Technologies Fully Automatic Water Level Controller with Water-Level Indicator
The device is well designed to save water and there are 3 sensor for a smooth operation 1 sensor put at the bottom, 1 sensor put at middle, and 1 sensor at top level of the tank. When the water level get low from the middle sensor the motor automatically switched on and same when the water level touch the top sensor the motor will automatically switched off. Water level indication provided to see water level in tank. Motor on off indication provided. High quality abs enclosure. So there is no man power required as it is operate as fully automatic. The power system is like Supply voltage 220-270V AC, suitable to 0.1HP to 2.0HP motor.
The product is designed as fully-automatic water controller and dry run protection in single phase. The device has anti-corrosion stainless sensor. The contact capacity of the device is 30Amps. There is start, stop, and auto manual switch. There are both indication for the tank level and the motor status.
4. Blackt Electrotech (BT21CSP) : Fully Auto Water Level Controller with Sensor For Overhead Tank
The device is well designed as the on/off pump depends upon the water level of the overhead tank. The microcontroller system based for power failure protection. The device use with float switch or sensor probes/ controller unit 10 AMP load capacity. The machine is well designed that can use up to 2HP motors. The product has 12 months warranty. Also the device has controller unit of 16AMPS load capacity and run up to 2HP motor.
5. Imagine Technologies Fully Automatic Water Level Controller and Indicator with Corrosion
The device well design with efficiently fully automatic water level controller for tank sump. This model will automatically switch on and automatically switch off the motor. It has auto on and auto off operation. Auto on occurs when the tank level is low confirming water is present in the sump. Auto off when the tank is full or when sump is empty suitable for motor pump up to 2HP. There is electronic starter. There is LED indicator in the device for motor on/off. Also has high and low level LED indications to know the level of both tank there will be one low level LED indication. The fully automatic control system and the micro control based design Protect from the power failure. The device work with any single phase or submersible motor for home, office, hospital, restaurant.
6. Digitix Water Level Controller + 5 meter Sensor Wiring kit
The device is design for the underground tank and the overhead tank. The water level in the main tank is always kept above the reserve level (OL sensor) and below the overflow pipe (OH sensor). If the motor operates continuously for more than 15 minutes (Run Timer), the DWLC 777 turns off the motor and allows it to cool for 30 minutes (Idle Timer). The motor works when the water level in the well/sump reaches the level necessary to start pumping, and stops when the water level reaches just above the foot valve. This eliminates the problem of air intrusion into the suction pipe. Pumping will resume 30 minutes after the water level reaches the SL sensor or when the water level reaches the SH sensor. The device mechanism is well designed that avoid over heat and the dry run the motor.
7. JR Electrokits 12V DC Fully Automatic Water Level Controller
The device is so well designed that it can work anywhere water based. It can be used in pond water tank, garage, basement flooding rains place where automatic drainage required. The device can work in 12VDC. The 7Amps is designed in it which is suitable for 1HP motor.
8. Magnus Automatic Water Level Controller with Float sensors
The device is designed with the voltage supply of 190vac to 250vac for the single phase. The maximum output load the device can handle up to 230V AC which is 3680W (1HP Motor). The ideal power consumption is 3VA. The device comes with 2 float sensor. This system is available for all types of the motor for controlling water, oil, chemicals tank etc.
9. HELICS (RCW-420)(36-mfd) : [Fully-Automatic] Submersible Water Level Controller
The device is designed according to the low and high voltage. The low voltage 130V and the high voltage 270V and mainly the overload protection. The inbuilt water level upper and lower bath tank control. There is LED indicator for both tank full and empty. There is high low and overload indicator LED as well. The device is designed with auto and manual switch. The device is well equipped for the use in all home industry and work place use. The device is also compact to use easily and manage the power consumption. Also the device can avoid overload water wastage.
10. KREENA TECHNOLOGIES MS Body Microcontroller Based Fully Automatic Water Level Controller
The device is designed for home and industry use. There is high quality M.S. enclosure. microcontroller based water level controller, all signal will pass in sensor through AC filter circuit that provides filter signal to sensor, that improve life of sensor, A.C signal passes on sensor side so never get rusting problem. This model automatically switch ON and switch OFF motor. When water level of overhead tank becomes low means water get down from middle sensor and water is present in the underground tank or sump, motor get start automatically. The tank starts filling up. When the water level reaches to the higher level, the motor automatically gets switched off. The product has 1 Year Manufacturer warranty service, repair or replacement. Package contain 1 water level controller unit. 6 SS sensors. 1 user manual with technical details. This model have dry run protection so it only start motor if water present in underground tank or sump. Suitable for 0.1 HP to 5.0 HP Motor, Protect motor from dry running. Motor ON OFF LED indication provided. Water Level indication provided for both tank. Supply voltage 220-270 V AC, Sensing element 304 S.S Sensor it is free from oxidation, long life. Any conducting wire can be used for sensor auto mode motor start and stop automatically. In manual mode user can start and stop motor by pressing start and stop button of controller.
11. WADERS Black Water Level Pump Controller
The device is designed like the primary function of the system is to make the user free of all his daily water filling requirements. The automatic system of the device manage the auto on/off the motor while water level is low or in full status. The model is suitable for the single tank. It monitor minimum and maximum level of the water tank. The pump is switched on when the water level is go down and auto off when the level comes up. By this way there is no chance of overflow. The device is also available for single phase submersible pump. There is one year of replacement warranty on the device.
12. IoTfiers ABS Water Level Indicator with Musical Alarm on Tank Full and Buzzer
The device is so well designed with a buzzer alarm to alert that the tank is full. The Four levels of indication using bright Red LED with different alarm on tank full and low level Four levels of indication using bright Red Led with “Paani Ki tanki Bhargai Hai “alarm on tank full. The device includes 5 stainless steel water level sensor for tank with 1.5M of attached wire (suitable for tanks up to 2000L). This water level indicator is made using electronic components, which assure longer life and durability. Package contents: 5 sensors, Main indicator panel, Instruction manual, Screws and Wire ties.
13. Ritchie Plastic Automatic Water Level Controller and Water Tank Level Controller
The device fully automatic and made in India. There is 1 year of warranty and 4 level of indication, can run motor up to 2HP. The 6SS sensor is silent operation both auto and manual mode. The top up switch works with MCB type starters. The package contains 6 high grade stainless steel water level sensor, main controller panel, user manual and some screws. The product has excellent quality which is long use and durable. The device is fully automatic which no need manpower to operate and all. The mechanism is easy to install.
14. SWIPE Hitech Fully Automatic Water Level Controller with Dry Run Protection
The device fully automatic the runs easily and dry run protection single phase. Also the device has anti-corrosion stainless sensor. The contact capacity of the device is 30Amps. All the things like start stop and manual switch is available in the device.
15. PIONEER CONTROLS Automatic Water Level Controller For Three Phase Borewell Motor
The system automatically controls pumping of water from Underground Sump / Well / Borwell to Overhead Tank. There is Overhead tank level indication. The Fully Automatic ON & OFF Seller will we provide technical support for Installation.
Conclusion:
Here are some lists of the automatic water level controller and it can be use in both home and industrial use. Mostly it helps when the tank is the in underground and also on the overhead. This is a smart choice to avoid water wastage.
