Current Magazine

New Technology Reduces Engine Wear, Fuel Consumption and Emissions

Posted on the 14 June 2013 by Dailyfusion @dailyfusion
Seat Leon FR 1.8 L I4 20v (179 PS; 177 bhp) turbo engine.

Seat Leon FR 1.8 L I4 20v (179 PS; 177 bhp) turbo engine.

Researchers at five Fraunhofer Institutes (Germany) have developed a method that can reduce combustion engine friction and wear at the stage of production of engine components. Special manufacturing techniques allow to significantly reduce fuel consumption and CO2 emissions. This method can also turn out to be very useful for protecting engine components against the corrosive effects of biofuels.

If a new car engine is to run “smoothly”, first it has to be properly run in: drivers should avoid quick acceleration and permanent short trips during the first 1000 kilometers, for instance. Why is this “grace period” necessary at all? When an engine is being run in, the peripheral zone on the articulations — the components in mechanical contact with one another — changes as a result of friction: the surface itself becomes “smoother”, and the granularity of the microstructure becomes finer at a material depth of roughly 500 to 1000 nanometers (nm), creating a nanocrystalline layer.

Precision boring of cylinder running surfaces rely on defined cuts with a specific geometry. Thus, surfaces of a very high quality can be created. (Credit: Fraunhofer IWU)

Precision boring of cylinder running surfaces rely on defined cuts with a specific geometry. Thus, surfaces of a very high quality can be created. (Credit: Fraunhofer IWU)

Quite a bit of friction has taken place, though, by the time this nano scale layer has formed. That is why, even now, a large share of the energy is lost to friction during the phase in which an engine is run in. Surface running properties are also a function of the customer‘s behavior during the running-in phase. A critical topic for the automotive industry: against the backdrop of increasingly scarce resources and the need to reduce CO2 emissions, reductions of friction loss has top priority on the development agenda.

Within the scope of the “TRIBOMAN” project, researchers at five Fraunhofer Institutes are working to develop production methods and processes to improve combustion engines’ tribological (meaning friction-related) performance. The focus is on components exposed to particularly high levels of friction, such as the running surfaces of engine cylinders. “Our common approach is to move the process of forming marginalized layers to an earlier stage in production”, explains Torsten Schmidt from the Fraunhofer Institute for Machine Tools and Forming Technology IWU in Chemnitz.

Schmidt and his team have developed optimized production technologies for precision finishing in this connection. “For precision drilling of running surfaces on cylinders, we use defined cutting edges with a specific design. This results in very high surface quality”, Schmidt adds. “We also systematically use the force of the machining process to promote “grain refinement” — meaning the hardening of the materials — even during production”.

The new process is designed to improve the influence on friction and wear in engine components in the future — taking the automotive industry a significant step closer to achieve the goal of using energy more efficiently and reducing COemissions. But customers stand to benefit as well: these new advancements would considerably shorten the running-in period for new engines. Besides improvements in comfort, it also reduces the risk of premature wear as a result of running in a new engine.

Using a single cylinder test engine with cylinder running surfaces of aluminum, researchers at the Fraunhofer Institute for Mechanics of Materials IWM in Freiburg have already documented the first positive results of this kind of modified finishing: analyses of the processed cylinder surfaces showed a significantly lower grain size compared to conventional methods. The surface microgeometry is comparable to the cylinder running surfaces of well-run-in cylinders. Researchers are currently working to adapt their method to new development trends in automobile manufacturing such as the introduction of biofuels: since the ethanol content of biofuels is higher, aluminum components are now usually fitted with a coating layer to protect them from corrosion more effectively.


You Might Also Like :

Back to Featured Articles on Logo Paperblog

These articles might interest you :

  • Big Food Giants Manipulate Public Health Policy in China

    Food Giants Manipulate Public Health Policy China

    Coca-Cola is at it again. As soda sales decline in the United States and Europe, beverage companies look to emerging economies like China for growth. And, it... Read more

    The 15 January 2019 by   Dietdoctor
    DIET & WEIGHT, HEALTH, HEALTHY LIVING, MEDICINE
  • Jewellery for a Precious You

    Jewellery Precious

    Jewellery is always close to a woman’s heart. It completes her look and boost confidence. Considering the changing trends in jewellery fashion, it becomes... Read more

    The 15 January 2019 by   Dr.jenifer Sayyed
    LIFESTYLE
  • Rajshri Productions’ Next Is A Film On Friendship | Hum Chaar | Trailer

    Abhishek Dixit’s debut feature film Hum Chaar is a Bollywood film made under the banner of Rajshri’s film. Hum Chaar is written and directed by Abhishek Dixit. Read more

    The 15 January 2019 by   Themoviean
    ENTERTAINMENT, MOVIES
  • Saint Paul the First Hermit

    Saint Paul First Hermit

    Today is the feast day of Saint Paul the hermit. This is a sweet and delicate Oatmeal Bread topped with rolled oats and naturally sweetened with agave. Saint... Read more

    The 15 January 2019 by   Veronica46
    FOOD & DRINK, RECIPES
  • Irupathiyonnaam Noottaandu | Teaser | Pranav Mohanlal | Arun Gopy

    Arun Gopy’s Irupathiyonnaam Noottaandu is an upcoming Malayalam action-drama feature film starring Pranav Mohanlal and Zaya David in the lead roles. Read more

    The 15 January 2019 by   Themoviean
    ENTERTAINMENT, MOVIES
  • A Year Of Body Positivity

    Year Body Positivity

    Last January, as I sat there on New Years eve all set to make the same old resolutions I've made year after year for as long as I can remember, I realised how... Read more

    The 15 January 2019 by   Sparklesandstretchmarks
    DIARIES, SELF EXPRESSION
  • Garden Bloggers Bloom Day – Jan 2019

    Garden Bloggers Bloom 2019

    Euphorbia rigidaWhen I went out to take the photos for this blog post I was surprised at how much was in flower dotted around the garden. Read more

    The 15 January 2019 by   Patientgardener
    GARDENING, HOME