An artist's image of the new nanotubular material appearing on the cover of Advanced Materials.Scientists at the Lawrence Livermore National Laboratory in California have created a new material that is 10 times stronger and stiffer than traditional aerogels of the same density.
This ultralow-density, ultrahigh surface area bulk material with an interconnected nanotubular makeup could be used in catalysis, energy storage and conversion, thermal insulation, shock energy absorption and high energy density physics.
SEE ALSO: Nanotechnology Enables Storing Energy in Copper Wire
Ultralow-density porous bulk materials have recently attracted renewed interest due to many promising applications.
Unlocking the full potential of these materials, however, requires realization of mechanically robust architectures with deterministic control over form, cell size, density and composition, which is difficult to achieve by traditional chemical synthesis methods, according to LLNL’s Monika Biener, lead author of a paper appearing on the cover of the July 23 issue of Advanced Materials (see footnote).
Biener and colleagues report on the synthesis of ultralow-density, ultrahigh surface area bulk materials with interconnected nanotubular morphology. The team achieved control over density (5 to 400 mg/cm3), pore size (30 µm to 4 µm) and composition by atomic layer deposition (ALD) using nanoporous gold as a tunable template.
“The materials are thermally stable and, by virtue of their narrow unimodal pore size distributions and their thin-walled, interconnected tubular architecture, about 10 times stronger and stiffer than traditional aerogels of the same density,” Biener said.
The three-dimensional nanotubular network architecture developed by the team opens new opportunities in the fields of energy harvesting, catalysis, sensing and filtration by enabling mass transport through two independent pore systems separated by a nanometer-thick 3D membrane.
Biener MM, Ye J, Baumann TF, Wang YM, Shin SJ, Biener J, & Hamza AV (2014). Bulk Materials: Ultra-strong and Low-Density Nanotubular Bulk Materials with Tunable Feature Sizes (Adv. Mater. 28/2014). Advanced materials (Deerfield Beach, Fla.), 26 (28) PMID: 25041968
