Horizontal privacy fence - If you have a pool in your backyard or want to enjoy your outdoor space without your neighbors looking at you, a privacy fence can offer the privacy you are looking for. Most wooden privacy fences use a solid structure; it means no spaces between fence panels. At a height of 6 to 8 feet, block their space from prying eyes. To achieve a professional look, it is necessary to level a privacy fence. There are two ways to do this, and you use depends on your personal preferences.
Build a horizontal privacy fence Level, Check with your county or city to determine whether a permit is needed to build a wooden fence. Adjust your messages and install the horizontal rails that support the vertical panels of the fence. Set up for your first panel. This should be the desired height for the fence. If the joint is greater than what you want the fence is, use a trowel to remove dirt under the panel until you can set the board to the desired height. If the board is not high enough, build the ground with gravel or rock. It will guide you into all the fence from the first panel, so make sure it is the right height and level before continuing.
Level a horizontal privacy fence Set a level on the top of the first panel and makes the necessary adjustments. You may want someone to help. Once the board is level, key in place. Measure to secure the first panel is at the correct height. If not, pull the board out and correct the problem. Place the next panel next to the first. Make adjustments to the ground as necessary to reach the right height. Move your level so that it covers both boards. If the second panel is flush with the first nail in place. If not, make adjustments to it and then fix it to the railing. Continue the process until each panel is in place.
