Connecting home theaters is relevant for people who want to enjoy movies and games at home. They allow you to get high-quality sound and create a presence effect. Many music lovers specifically select components that will allow you to get a pleasant sound when listening to music. Some manufacturers also offer a karaoke function.
How to Choose Home Theater Equipment
Equipment is the basis of a home theater. When choosing it, you should focus on your budget, room size, and system requirements. The cost of individual components may vary depending on their characteristics. Here are some recommendations:
- When choosing a receiver, pay attention to Dolby Atmos support. Mostly, top models have no problems with this. But if you choose in the middle or economy segment, pay attention to this.
- Acoustic systems must be powerful and reliable. It is important to choose those speakers whose parameter exceeds the maximum power of the amplifier. The resistance parameter must be similar to or higher than that of the amplifier.
- Blu-ray or media player can be selected as a signal source. It must support the required decoders. If you want to control the system via your phone, pay attention to Wi-Fi support.
- Don’t skimp on cables. Pay attention to their braiding and length. Also, to protect against contact oxidation, you can choose gold-plated wires. Because this affects the sound quality and can distort it.
You can choose the classic 5.1 acoustics option, which has two front speakers, two rear speakers for ceiling installation, and a subwoofer. To reproduce the DolbyAtmos signal, you need to buy the appropriate speakers or install built-in ceiling speakers.
What to Consider When Setting Up a Home Theater
After purchasing such a system and during its design, the question arises about how the home theater is installed. If you want to make a movie theater in your home or install such a system in your living room, you should consider the following points:
- First of all, working drawings are needed, according to which the installation of the home theater is carried out. They should indicate the location of the equipment;
- the connection of all elements is carefully thought out in such a way that they cannot mutually negatively influence each other;
- soundproofing is carried out so that watching a movie or playing a game does not disturb neighbors and family, breaking the silence;
- The design of the home theater is adapted to the interior of the room, for example by installing built-in systems.
Each of these stages has its characteristics and there is no universal instruction for everyone. Because it is worth starting from the selected system, the characteristics of the premises, and the equipment in general.
Steps to Install Home Theaters
Many people prefer to choose systems with DolbyAtmos, which creates surround sound. Therefore, let’s consider the installation steps using the example of such a home theater.
Prepare the room
If you want to enjoy movies and games, but at the same time care about the comfort of your family and neighbors, you should think about how to reduce noise. Most likely, the room for a home theater will be a living room with soft comfortable sofas, armchairs, and pillows. These are already excellent noise absorbers. You can also additionally soundproof the walls and ceilings.
Install the front pair correctly
When planning the placement of front acoustic systems and speakers, imagine that an isosceles triangle should be formed between you. Based on this, you can determine the angle of rotation of the speakers towards the listener. If the speakers have a wide dispersion, you can install the speakers by ear.
Install rear speakers
They should be located slightly beyond the listening area at head level. For this, various stands and brackets are used, they are located opposite the front channel.
Put the center channel
It is important to place it not on the floor, but above or below the center of the screen. If you place the center channel on the floor, it can ruin the feeling of realism of the sound.
Install a subwoofer
To make the sound more impressive, it is better to place it in the front part of the system close to the wall. The thunderous effect is achieved because the sound is reflected from the wall.
Set up speakers for Atmos
Some models have them built into the front pair. But they will not function well if the room uses stretch ceilings. Therefore, for such cases, it is better to think about ceiling acoustics.
Connect the system to the receiver
The receiver is considered one of the main elements of a home theater because all the equipment of this system is connected to it. It has many digital and analog inputs to connect different elements from Blu-ray to game consoles.
It is worthwhile to connect all cables for acoustics and video to the receiver from the very beginning. Because due to the abundance of wires, it will be difficult to understand them after installation. Keep in mind that the network cable can greatly distort the signal of the acoustic cable. Therefore, it is worth ensuring that they do not intersect.
To set up your receiver correctly, use the auto-tuning function. It saves a lot of time and helps you get started watching movies faster. But even after you’ve used this function, manual tuning remains available. So later you can adjust certain parameters based on your personal preferences.
Designing a Home Cinema Room
In some cases, a redesign of the premises is required to ensure full support of the characteristics declared by the equipment manufacturers. This allows:
- create a real cinema at home;
- adapt the room for watching movies;
- Get hi-fi or Hi-End level sound and video.
It is difficult to do this without the help of specialists on your own. Because large-scale work is required, including laying cable lines, soundproofing, and replacing doors and windows. Also, to give the interior an aesthetic appearance, additional work is required, which may include the development of a design project. The final stage is finishing work, and installing individual components and furniture. After all the work is completed, the cinema hall is ready for use and you can start watching movies.
Why it is better to entrust home theater installation to professionals
As you can see, from the selection of equipment for a home theater to the installation of each component, all stages have certain subtleties. If you have not installed such a system before, it is better to order this home theater installation service in Portland. This way, you can save time, and the price of installing a home theater is quite affordable. If you are interested in this service, you can check out the price list and get advice from specialists.
They will be able not only to connect the system correctly but also to disguise and protect the wires from damage. When installing it yourself, not everyone pays attention to this, as a result, the wires lie freely on the floor, can get damaged or someone can trip over them.
