Is your ceiling invaded by mould? And you don’t know how to fix it? If you’re out of ideas, don’t worry! We offer you natural solutions to remove black stains without damaging your bathroom or kitchen ceiling. For this, you will not need to rush expensive chemicals because you already have everything you need at home to put an end to this manifestation of humidity.
Mold most often appears in the most humid rooms of the house. Not only does this cluster of microscopic fungi form unsightly spots, but it also gives off a musty smell. To prevent the development of these traces of mould, which are unsightly and dangerous to your health, we recommend that you eliminate them once and for all with these effective and inexpensive tips.
Ceiling area covered with traces of mold – Source: spm
Why do mold stains appear on the ceiling?
Mold problems on the ceiling can be due to poor ventilation of rooms, especially the bathroom or kitchen. Apart from this, water infiltration, poor insulation or even excess heat can also be the cause of these unsightly stains on our ceilings and walls.
Read also: A coin: the miracle solution for cleaning the oven, find out how
If you have to consider the cause behind these mold stains on your ceilings, these must be eliminated as soon as possible. to prevent their spread. And for good reason, their effects can be serious for your health and your home. Luckily, you can fix the problem with a few accessible and effective tricks that involve using products you already have at home:
Use baking soda and white vinegar to clean ceiling mold
Baking soda and white vinegar – Source: spm
Due to their disinfectant properties, white vinegar and baking soda are a very effective duo for getting rid of mold on the ceiling. To use these inexpensive products against these black spots, we advise you to proceed as follows:
- Dilute a cup of white vinegar in a liter of hot water.
- Apply the solution to a sponge mop.
- Firmly rub the surface to be treated but without forcing either. LayLet the vinegar work on the stained area for 15 minutes.
- Then use another bucket filled with 1 liter of water, add a glass of baking soda to it and then dip the sponge mop in the solution to scrub the mold area. Finally, use with a damp, clean sponge to remove product residue and mold.
Get rid of mold on the ceiling with hydrogen peroxide. An effective mold remover
Hydrogen peroxide is another disinfectant that you can find at most DIY stores. To use it, do the following:
- Use a vacuum cleaner to remove dirt and dust from the mold-prone area, then wipe it down with a damp cloth.
- Then use a sponge soaked in hydrogen peroxide to clean the affected parts. Leave on for 10 minutes then rinse with a damp towel. Then wipe with a dry towel.
Other natural alternatives for cleaning mold on the ceiling
If it’s not convenient for you to use the mop, you can always fall back on a spray bottle for your convenience. Pour a mixture of equal parts water and white vinegar, spray the surfaces to be cleaned then finish with a sponge stroke and you’re done. Of course, you will need a ladder if the mop alternative is not an option for you.
Another very effective technique is to take advantage of the disinfectant power of tea tree essential oil to eradicate mold and germs. The tea tree thus stands out as a worthy alternative to white vinegar. As with the previous solution, a wipe with a cloth soaked in this oil may be enough to put an end to the traces of humidity.
Essential oil – Source: spm
Don’t forget the lemon juice whose cleaning and disinfecting power easily rivals that of the other products mentioned. Mix it with baking soda and apply the paste to the problem area. This should break down the traces of moisture.
As mentioned above, the bathroom remains one of the rooms most prone to mold and other manifestations of humidity on the ceiling, walls or tile joints. If even with a VMC (controlled mechanical ventilation), your humidity problem persists, the natural solutions mentioned are excellent ways to eliminate these traces of mold. A mixture of hot water and white vinegar should do the trick.
Read also: Mold will disappear from your home thanks to an old trick from grandmothers
It is also necessary to think about creating the right conditions in the room so that mold does not form on the walls and ceiling. A good habit is to let the humidity escape by ventilating the room. You can also use a dehumidifier if the humidity is high.
With these products that you probably have at home, say goodbye to mold and unsightly stains on the ceiling.
Read also: What is the grid in the ceiling of the car for? It has a very useful hidden function
Via SPM
