Wall hugger recliners are an excellent choice for those who want the comfort of a recliner without needing a lot of space. These recliners are designed to be placed close to the wall, as they move forward when reclining rather than back. To ensure you purchase the right wall hugger recliner for your space, it's essential to take accurate measurements. Here's an in-depth guide to help you measure your space effectively.
Key Takeaways:- Understand the recliner's dimensions, including width, depth, height, and reclined depth.
- Measure your available space, accounting for the width, depth, and height needed for the recliner.
- Consider additional factors like clearance for movement, proximity to electrical outlets, and room aesthetics.
- Test and finalize measurements by marking the space and simulating the recline to ensure accuracy.
Step 1: Understand the Recliner's Dimensions
Before measuring your space, familiarize yourself with the typical dimensions of a wall hugger recliner. These measurements usually include:
- Width: The distance from one armrest to the other.
- Depth: The distance from the front to the back of the recliner when it is in the upright position.
- Height: The distance from the floor to the top of the backrest.
- Reclined Depth: The distance from the front to the back of the recliner when it is fully reclined.
Make sure to check these dimensions in the product specifications of the recliner you are considering.
Step 2: Measure Your Available Space
-
Measure the Width
- Use a tape measure to find the width of the area where you plan to place the recliner. This measurement should be at least a few inches wider than the recliner to ensure there is enough space for comfort and movement.
- For example, if the recliner is 30 inches wide, the available space should ideally be at least 34-36 inches wide.
-
Measure the Depth
- Measure the depth from the wall to the point where you want the front of the recliner to be when it is upright.
- Next, add the depth of the recliner when it is in the upright position to the additional space required for reclining. For wall hugger recliners, this additional space is usually minimal, often between 4 to 6 inches.
- For instance, if the recliner has a depth of 35 inches in the upright position and needs 5 inches to recline, the total depth required is 40 inches.
-
Measure the Height
- Measure the height of the space, especially if you have low ceilings or plan to place the recliner under a shelf or window. Ensure there is enough clearance above the recliner for it to fully extend without obstruction.
- Most recliners have a height between 40 and 45 inches, but always check the product specifications.
Step 3: Consider Additional Factors
Step 4: Test the Measurements
Step 5: Finalize Your Measurements
FAQs for Measuring Your Space for a Wall Hugger Recliner
What is the difference between a wall hugger recliner and a regular recliner?
A wall hugger recliner is designed to be placed close to the wall, as it moves forward when reclining rather than backward. This design minimizes the amount of space needed behind the recliner, making it ideal for small space. In contrast, a regular recliner typically requires more clearance behind it to fully recline.
How much space should I leave between the wall and the wall hugger recliner?
While wall hugger recliners require less space than regular recliners, it's still important to leave some clearance. Typically, wall hugger recliners need about 4 to 6 inches of space behind them to fully recline. Always check the specific product dimensions to ensure you leave adequate space.
Can I place a wall hugger recliner in a corner?
Yes, you can place a wall hugger recliner in a corner. However, you need to ensure there is enough space for the recliner to move forward and for you to sit comfortably. Measure the depth of the recliner when it's fully reclined and ensure the area allows for this movement.
How do I measure the space if my recliner has power features?
When measuring the space for a wall hugger recliner with power features, consider the location of the nearest electrical outlet. Measure the distance from the recliner's placement area to the outlet to determine if an extension cord is needed. Additionally, ensure that the cord will not create a tripping hazard or interfere with the recliner's movement.
Also Read: Best Fabrics and Materials for Recliners
Final Words
Measuring your space accurately is crucial to ensuring your new wall hugger recliner fits perfectly and functions well in your room. By following these steps, you can make an informed decision and enjoy the comfort and convenience of your new recliner without any hassle. Happy reclining!
