How To Fix iPhone Boot Loop & Black Screen Issues? [Easy Methods]

Many iPhone and iPad users have complained about boot loop and black screen issues. There are several reasons behind iPhone boot loop and black screen issues. However, there are many easy ways to solve them. You might encounter such issues after updating to the latest iOS 14 or restoring your iPhone. If you are looking for solutions to these issues, you can go to an Apple service center, but there everyone is aware of Apple repair costs and you may need to submit your iPhone for repair, which could take a day or two. Before you visit an Apple Store, here are some simple yet effective troubleshooting tips you can use to get rid of iPhone boot loop and iPhone black screen.

In case these tips are not helpful (we hope they will), your last resort would be to consult an Apple technician for the issue with your device.

Fix iPhone Boot Loop and iPhone Black Screen: Basic Troubleshooting

Force restart your iPhone

The first step to fix iPhone stuck on Apple logo is to force restart it. Here's how to do it:

If you have an iPhone 6 or earlier, press the power button and the home button simultaneously until the screen turns off.

For iPhone 7 or 7 Plus, press the power button and the volume down button simultaneously and don't release the button until you see the Apple logo.

If you have an iPhone 8 or higher, press and release the power button and do the same with the power button. Once you see the Apple logo, press the power button.

Use iTunes to restore if iPhone keeps restarting

1. Connect your iPhone to your PC using the USB to Lightning cable, then launch iTunes. Make sure that iTunes is updated to the latest version before continuing.
2. Go to the "Backups" section and click on the "Restore Backup" button. You will be presented with a list of your previous iPhone backups. Choose the backup from which you want to restore data to your iPhone.

Another method to get out of iPhone boot loop is to use iTunes to restore it. Here's how to fix iPhone black screen issue:

Before using this method, we have to tell you that you will lose your data in the process. Therefore, if you have not backed up your iPhone, we do not recommend that you use this method to get rid of iPhone error 4013. If you have recently backed up your data to iCloud, you can use this method without too much. care about your personal and valuable data.

Once the backup is restored, you will see that you will no longer be stuck in the boot loop.

Use Recovery Mode to Fix iPhone Black Screen

1. Connect your iPhone to your PC using the USB to Lightning cable, then launch iTunes. Make sure that iTunes is updated to the latest version before continuing.
2. Press and hold the home or power button on your iPhone for a few seconds until you see the recovery mode screen. When you see the recovery mode screen, release the button and click Update iPhone. The PC connected to your iPhone will start installing the latest iOS to resolve the issue.

You can also use iPhone recovery mode using iTunes to fix iPhone stuck on Apple logo. Follow the steps mentioned below for the same:

Please note that all your data will be deleted during the process. Hence, we recommend users to make a backup to iCloud before proceeding with this method to fix iPhone.

Use dr.fone System Repair to fix iPhone stuck in boot loop without losing data [Recommended Method]

Download the software from the official website according to your operating system. Install and launch it, then choose "System Repair" option. Connect your iPhone to the PC using a USB cable.

Here you will see two options: standard mode and advanced mode. Choose Standard Mode to get rid of iPhone black screen without losing your data.

Then choose your iPhone model and the correct iOS version to download the firmware. After choosing the right options, click the Start button to start the firmware download.

The download process will take some time. Until the firmware download is complete, make sure your iPhone is connected to the PC and you have a stable internet connection.

Once the firmware is downloaded, click on the " Fix Now " button to fix all the issues with your iPhone including iPhone black screen, error 4013, iPhone stuck on Apple logo , etc.

When the procedure is complete, you will receive a message on your PC stating "Repairing the operating system is complete". Your iPhone will restart automatically.

While all of the above-mentioned methods carry a risk of data loss, there is one more safe method that we recommend for our users. You can use Dr.fone System Repair (iOS System Recovery) from Wondershare to fix your problematic iPhone. It is compatible with the latest iOS 14 as well as previous versions of iOS. Additionally, you can download the dr.fone app for Windows and macOS.

Here are the steps to follow:

If the software does not recognize your device, you need to click "The device is connected but not recognized" and restart it in DFU (Device Firmware Update) mode as shown on screen instructions. To enter DFU mode, hold the power and home buttons at the same time for 10 seconds. Now release the power button (not the home button). As soon as your device enters DFU mode, the app will recognize it automatically.

If the problem is not resolved, you can click the "Retry" button to repeat the procedure one more time.

The post How to fix iPhone boot loop and black screen issues? [Easy Methods] first appeared on Fossbytes.