An evening swim is dependably a great movement throughout the mid year, however you should guarantee your pool lighting is working accurately. When one of your lights goes out, it can make swimming less enjoyable. Although replacing the bulb in your swimming WakingPools can be done quickly, it does require some knowledge.
Let’s go over the complete, step-by-step procedure for changing your light bulb, the differences between doing it yourself and hiring a professional, and the most important things to keep in mind when looking for a new bulb. Read my guide on pool light troubleshooting if you are experiencing additional issues with your lights.
The pilot screw must be removed, the housing must be separated from the wall, the light fixture must be disassembled, the old light bulb must be removed, and then everything must be reassembled.
Make a point to switch the power off and utilize a multimeter to check for an electrical flow while supplanting a pool light.
Check the voltage, brightness, wattage, and cable length of the replacement light bulb to find the right one. Check to see if the lightbulb and the fixture are compatible learn more.
Bit by bit Interaction: How to Change a Pool Light When changing the pool light, you need to be careful. It can be risky because electricity and water are involved, so you need to be careful at every step.
Step 1: Turn Off the Power The first step is to turn off all of your pool’s lights. The electrical switch confine your home ought to contain a “pool” mark. Turning this breaker off will stop all power to your pool. Flip the switch on the pool light to make sure it doesn’t turn on to make sure the power is off.
Step 2: Take Out the Pilot Screw In most cases, the main screw that holds the light fixture together is at the top. This screw will most likely need to be removed with a Phillips head screwdriver. Contingent upon the light installation’s level, you might have to get into the pool to eliminate it. After removing the screw, be sure to store it safely.
Step 3: Really take a look at For An Electrical Flow
Utilize a multimeter to check for an electrical flow on the wires prior to taking care of them. Even if you turn off the breaker, electricity may still be flowing if there is a broken wire.
Step 4: Take a flat-head screwdriver and pry the light fixture from the light housing to separate it from the pool wall. The bottom of many fixtures will have a tab that lets you take them off the wall. When you slacken the apparatus, you can resolve your fingers and pull it of the wall.
Step 5: Dismantle the Light Installation
Maneuver the installation onto your pool deck (there ought to be sufficient wire to do this), and eliminate the focal point and cover. To remove your lens from older pools, you might need to take out screws.
Most of the time, the tabs on new pool lights can be pry out. Set your rubber gasket and lens aside in a secure location. During the process of disassembling the light, try not to get any water on it.
Step 6: Take Out the Old Light
When the gasket and focal point are done obstructing the installation, reach in and get the old bulb with a towel. Contort counterclockwise to eliminate it.
Step 7: Install the New Light Bulb
If you haven’t already, purchase a matching replacement bulb (more on replacement bulbs below). The kind of bulb that your pool requires can be found in the user manual. Verify that the serial numbers, brand, and size match before making the purchase.
To turn the new bulb clockwise, place it in the middle and hold it in place with a clean towel. Some types of lightbulbs, like halogen bulbs, are fragile and can be damaged by oil on your fingers, so you shouldn’t touch them directly.
Step 8: Test the Light
To make sure that you supplanted the bulb effectively, turn on the power for a couple of moments. Check to see if the new light comes on by flipping the switch on the electrical pool box or circuit breaker back to “on.” If it does, immediately flip the switch back to “off.”
Step 9: Replace the lens on your light fixture and then reinstall it. Cover the bulb with the lens and gasket once more. To dry any water that is on or near the device, use a towel. Make certain that the gasket lies flat between the fixture’s cover and the lens before closing the fixture with any screws that are required.
Step 10: Return the Light Apparatus to the Mass of the Pool
When you effectively reassemble the apparatus, set it back into its put on the pool wall. Place the screw back into its original hole at the top of the fixture while holding it in place with one hand. Then, using your Phillips-head, tighten the screw until it is securely fastened in place.
Step 11: Turn the Power Back On The circuit breaker’s power must be turned on as the final step. Turn on the light to check that everything is working as it should after turning back on the circuits.
Do-It-Yourself versus Employing a Star
Albeit changing a pool light is a straightforward interaction, it is more muddled than transforming one inside your home. There are some additional risks, and individual factors may vary. With electricity present, this can be a risky undertaking because the bulb might be submerged in the water.
On the off chance that you are as yet OK with changing the bulb yourself, you should consider a couple of things to guarantee that you can do it securely. Check to see that you have the following materials:
Dry towels, a flathead screwdriver, a new replacement light bulb, and a multimeter are all you’ll need to complete the task. You should also turn off the power to keep the electrical wires safe. This shut-off is essential since you will be in touch with the wires during substitution.
Another crucial step in the DIY process is testing the wiring. Make sure that no electricity flows through the wires with your multimeter.
When handling both the old and new light bulbs, use a dry towel and exercise extreme caution.
Hire a professional for this project if you are unsure or hesitant about the DIY approach.
Ways to pick the Right Substitution Pool Light
There are many kinds of substitution pool lights available. Before you purchase your new light, think about a few things.
The voltage of the light is the first thing to check. There are options for 120V and 12V lighting; The lighting system of your pool could be damaged if the wrong one is placed. Check with your local code to see if either one is required before making a decision.
When looking for a new pool light bulb, brightness is another important consideration. Lumens are used to measure how bright the light is. 120V and 12V choices convey a similar power, however Drove lights work in an unexpected way. Verify the accurate value by consulting the manufacturer’s information.
The power of the light is measured in watts, and a typical LED typically produces between 30 and 90 watts. The expense of power will increment with the wattage. Driven lighting is a substantially more practical choice when contrasted with brilliant. A 45-watt Drove light will produce a similar power as a 300-watt brilliant choice.
The length of the cable is an important consideration if you decide to purchase a wired LED pool light. These strings are difficult to change since they are for all time appended to the light.
While shorter lengths are also available, the most common cord lengths are 30, 50, 1000, and 500 feet. To project the ideal rope length, measure the distance between your power source and pool and add an additional 10 feet.
And one more important point
Check to see if the lightbulb you buy will work in your fixture. Introducing some unacceptable light will bring about the light not turning on, however it could in fact harm the apparatus. Go to my aide on the best pool lights for suggestions on substitution bulbs.
Conclusion
That’s all there is to changing the pool light bulb! Hopefully, this makes things much simpler for you, or perhaps you’ve decided to hire a professional. In the event that you have questions, send me a message. I’m always willing to assist in any way I can.
