How To Build Horizontal Fence Designs - A horizontal fences are an elegant choice for creating a robust fence that makes the winds and sunshine, but provide privacy from passersby. With a few tools and a little concrete, can be attractive fences easily be yours.
![How To Build Horizontal Fence Designs How To Build Horizontal Fence Designs](http://m5.paperblog.com/i/151/1519420/how-to-build-horizontal-fence-designs-L-YvWrdG.jpeg)
Instructions to build horizontal fence designs; place a marker flag in every corner of the area you want fenced. Measure the rope lengths on each side of the fence designated area, using a tape measure. Cut each length of 52 inches. The number found is the number of fence posts as needed for each length of the fence. Buy the necessary number of pine four-by-fours and sixes after. Dig a 10 inch wide, 3-foot-deep hole was 52 inches along the rope line. Place the first hole at the top of the fence.
Next steps build horizontal fence designs, place in an 8-foot-long, and four-by-four in the middle of each hole. Fill the hole with gravel. Compress the gravel was 6 inches with a tamper. Draw a horizontal line on each post at 2.5 inches from the top and 2.5 inches from the bottom. Between these two lines is 55 inches. Draw 11 diagonal lines, the bottom of the diagonal before your yard, down the two sides of each post facing another post. Each diagonal line will be 6 inches long with a 50-degree angle. To help create diagonals and keep them also, draw a horizontal line from the level bottom of a diagonal to the top of the next diagonal. Attach a 48 inch long, one after six to each diagonal line, starting with the bottom line. Hammer the 8-d galvanized nails at a 45 degree angle downward from the top of the board in the post. The redwood board will affect the next post on the corresponding diagonal line. Nail in the next message using the same downward angle. Continue to place angled slats connect diagonal lines. End the louvered fence by covering the nails with wood putty.