Great Pneumatic Siding Nailer Guns for Current 2018 Year

Siding nailers are used to attaching siding to the house; these devices use nails that measure 1.25" to 2.5". Most nailers provide specific material properties, such as wood or aluminum, it's always best to suit the nailer to the siding material.

Nailers were developed to speed up and make safer the process of attaching sidings to a house; they come in three power source forms, fuel, electricity and pneumatic, this guide reviews the top pneumatic siding nailers.

This guide was created to help you find the best solution for your work or DIY home project. However, you should determine which nailer you will need, and consider all the possibilities a siding nailer model can provide. Factor in the frequency of use, and materials to be attached. At the end of the review, I attach a brief explanation about the different power sources and features to look out for, to help you make the best choice.

Here are the best pneumatic siding nailer guns:

Introduction

The Bostitch N66C is a versatile pneumatic nailer. This model provides you with 515 in/lbs., of driving power and an operating range of 70 to 120 PSI. It will nail any siding material you choose into all types of surfaces, including the hard ones, such as cement, clapboard, fencing, and even light-gauge steel.

This device comes with an aluminum housing, weighs in at 4.9lbs so its lightweight and easy to use. It works with both wire-weld and plastic-inserted coil nails. It includes a soft rubber foot that's makes working with softwood easy.

The nailer is also adaptable and can be set for 1-1/4-inch to 2-1/2- inch nails, and it comes with a 350-nail magazine.

Power Source

Pneumatic, any air compressor providing 515 in./lbs. of driving power with an adjustable 70-120psi

Features

• Works with a Variety of Siding Materials, from Soft Wood to Steel
• Accepts both wire-weld and plastic-inserted coil nails from 1.25″ to 2.5″.
• Adjustable depth guide sets nails to desired depths.
• Tool-free adjustable exhaust

Specs:

Introduction

Freeman PCN65 coil nailer can be used for variety of applications including cement siding, decking, fencing, and sheathing Installation. It shoots 15 ^o nails ranging from 1 1/4″ to 2 1/2″. The PCN65 come with an adjustable depth control, this gives you controlled and adjusted nail depth per application.

Power Source

Pneumatic, any air compressor providing an adjustable 70 -110 psi

Features

• Compatible fasteners include all 13 & 14 Gauge 15° Wire/Plastic Collated Siding Nails
• Plastic Collation: 1 1/4″ - 2 1/2″, Wire Collation: 1 3/4″ - 2 1/2″
• Features: 360-degree Adjustable Exhaust
• Magnesium Body
• Anodized Aluminum Parts
• Rubber O-Rings
• Finger Depth Adjust
• Air Filter / Dust Cap
• Reversible Belt Hook
• One Piece Driver Blade
• Open Nose Design
• Trigger with safety lock
• Oil and Wrenches included.

Specs:

• Fastener Gauge: 15"
• Dimensions 14.5" x 13"
• Weight: 5.3 Lbs.

Introduction

The Makita AN611 is a solid and rugged tool that provides ample power for installing fiber cement and wood shingle sidings.

Power Source

Pneumatic, works with all air compressors and provides 65 - 120 PSI.

Features

• Control- 3-mode selector switch (bounce, sequential, lock)
• 'Tool-less' depth adjustment with 9 settings.
• 'Tool-less' loading canister with a 200 - 400 nail capacities
• Durability- Built-in air filter minimizes dust and debris from entering tool.
• Nail Sizes: 1-1/4"- 2-1/" with .080" to .099" shank diameter.
• Drives 15º wire and plastic collated nails for added convenience
• Built-in air filter
• Multi-directional exhaust port
• Rubber bumpers protecting work surface and tool
• Smooth nose tip
• Rubber grip
• 3-year limited warranty
• Comes with
  • Pneumatic Nailer Oil (181434-7)
  • Hex Wrench (783202-0)
  • Tool Case (824490-1)
  • Safety Goggles (191687-A)
  • Air Fitting (311006-A)

Specs:

• Weight 5.1Lbs.
• Dimensions 13-1/16" x 5" x 12-1/2"

Introduction

The Hitachi NV65AH2 2-1/2″ coil siding nailer gives you the advantage of using both wire or plastic sheet nails. This is a fast, light and accurate tool for managing most soft to hard materials and surfaces.

Power Source

Pneumatic, works with all air compressors and provides 70-120psi

Features

• Selective actuation switch allows for either sequential or contact nailing
• Side-load, tilt-bottom magazine
• Tool-less depth of drive adjustment
• Uses drives wire and plastic sheet collated nails
• Adjustable air deflector
• No-mar nose cap attachment
• Plastic shield that deflects wire collation for added safety
• Long-lasting rubber grip
• Includes:
  • Safety Glasses (875769)
  • No Mar Nose Cap (878344)

Specs:

• Collation: Coil, Wire/Plastic Sheet
• Magazine Angle 16-Degrees (wire) 15-Degrees (plastic)
• Fastener Length Capacity: 1-1/2″ - 2-1/2″
• Fastener Diameter Range: .090 - .099
• Magazine Capacity: 200-300
• Magazine Loading: Side
• Air Inlet: 3/8″
• Actuation: Contact or Sequential
• Dimensions: 11-27/64″ x 5-3/64″ x 11-3/16″
• Weight: 4.8lbs

Introduction

The Bostitch N66BC-1 is a versatile pneumatic nailer. This model is smaller (although heavier) than the N66, and provides you with 500 in/lbs., of driving power and an operating range of 70 to 120 PSI. It will nail any siding material you choose into all types of surfaces, including the hard ones, such as cement, clapboard, fencing, and even light-gauge steel.

This device comes with a magnesium housing, weighs in at 5.8Lbs. It works with both wire-weld and plastic-inserted coil nails. This model comes with a "dial a depth" adjustment for accurately setting your depth per job.

The nailer is also adaptable and can be set for 1-1/4-inch to 2-1/2- inch nails, and it comes with a 350-nail magazine.

Power Source

Pneumatic, any air compressor and provides 500in./lbs. of driving power with an operating Pressure: 70 - 120 psi

Features

Specs:

• Firing / Actuation Mode: Sequential with Contact Trigger Included
• Magazine Angle: 15^o
• Dimensions: 12" x 10" x 6.5"
• Weight: 5.8lbs

Introduction

This is the DF225C Coil Siding Nailer System, it's a lightweight and versatile nailer for Hardie board,

fiber cement, wood fiber, and Cedar board siding, as well as fencing and decking.

Power Source

Pneumatic, any air compressor, and provides an operating Pressure of 80-120 psi

Features

• Tool-Less Adjustable Depth of Drive
• Tool-free 360° Adjustable Exhaust
• Durable Metal Belt Hook
• Clear Magazine
• Switchable Trigger
• Comfortable Rubber Grip
• No-Mar Tip

Specs: Introduction

The MAX CN70 super heavy-duty pallet and crating coil nailer is used mainly for pallets (hence the name). This is a powerful tool for wood applications, and is applicable for pallet and crating, fencing, framing, sheathing, subflooring and more

Power Source

Pneumatic, any air compressor and provides an operating Pressure of 70-100 psi, and air consumption: .052ft3 / cycle @ 90 psi

Features

• 15^o Pneumatic Wire Coil Nailer
• Die-cast aluminum construction
• 225-300 Magazine
• Multi-directional exhaust
• Comfortable rubber grip

Specs: Introduction

This is the Hitachi NV75AN(S) coil siding/framing nailer that gives you sequential/single fire only) This model is capable of driving large nails 3″ x .131″ at a rate of 3 per second.

Power Source

Pneumatic, any air compressor and provides an operating Pressure of 70-120 psi

Features

• Capable of sequential/single fire only
• Tool-less depth of drive adjustment
• 360 degree adjustable air deflector
• Side load magazine
• Open nose design
• Clear plastic shield
• Drives wire and plastic sheet collated nails
• Long-lasting rubber grip
• Includes:

Specs:

• Collation Angle 16 Degrees plus or minus 1
• Nail Length- Plastic Collated: 1-3/4″ - 2-1/4″
• Nail Length- Wire Collated: 1-3/4″ - 3″
• Nail Diameter: .099″ - .131″
• Magazine Capacity: 200-300
• Dimensions: 11″ x 5.2″ x 12.4″
• Weight: 6.3Lbs

Introduction

The MAX CN565S3 SuperSider siding coil nailer is a lightweight fast working sider that is great for high volume siding, fencing, exterior trim, sheathing, subfloor, roof decking, exterior decking, furring and strapping applications.

Power Source

Pneumatic, any air compressor, and provides an operating Pressure of 70-100 psi

Features

• 15^o Pneumatic Wire Coil Nailer
• Die-cast aluminum construction
• 400 Magazine
• Multi-directional exhaust
• Comfortable rubber grip
• Includes:
  • Rafter hook
  • Carrying case

Specs:

• Fasteners: 15^o wire collated nails from 1-1/2″ to 2-1/2″
• Magazine Capacity: 400 Nails
• Shank Diameter: .083″ to .099″
• Nail Range: 1-3/4″ to 2-3/4″
• Dimensions: 11-7/8" x 5" x 10-7/8"
• Weight: 5lbs

Introduction

This is the Dewalt DW66C-1 siding nailer that is lightweight, with an aluminum housing. Drives wire weld and plastic inserted coil nails and is great for most soft material sidings and surfaces.

Power Source

Pneumatic, any air compressor and provides an operating Pressure of 70-120 psi

Features

• 15^o coil siding
• Magazine for 300 nails
• Drives wire weld and plastic inserted coil nails
• Tool-free adjustable exhaust
• Tool-free adjustable rafter hook
• Durable, lightweight aluminum housing
• Smooth rubber foot aids
• Tool-free depth of drive adjustment

Specs:

• Minimum Fastener Size 2 ½"
• Fastener length: 1 ¼" to 2 ½"
• Nail diameters .080" to .092"
• Dimensions: 6.3" x 15" x 15"
• Weight: 4.9Lbs

Pneumatic nailers connect to most air compressors and provide adjustable PSI from around 70 to 140. Pneumatic nailers are less expensive than the other powered models (fuel, electricity), and they require you won an air compressor.

You might think that the price of the air compressor ruins the cost of the nailer, but when you factor in all the air powered tools you might need, then the value of the air compressor goes way down, and its application value goes way up.

While pneumatic nailers are connected to an air compressor, you can reach anywhere with them. Their added advantage is that they provide a constant torque, are not prone to power shortages like an electrical unit, nor flammable like a fuel powered unit.

Another advantage of pneumatic nailers is their longevity due to less moving parts.

Maintenance

Make sure you oil your nailer before and after use.

Safety

Pneumatic nailers are loud; the noise is compounded by the air compressor. So always wear ear mufflers.

Pneumatics creates blowbacks, so always wear eye protection and goggles.

What to Look out for Easy Jam Clearing

Nail guns jam. This is a common occurrence; therefore you must make sure that you buy a siding nailer with a jam clearing system.

Depth Adjustment

This is very important for all job types, and you should buy a nailer that has an adjustable depth gauge. I always recommend buying a hand adjustable depth unit; this gives you better control and constant, reliable results.

Nail Size Adjustment

Always aim for a nailer that gives you maximum ranges of flexibility. This means a gun that will enable you to use different nail gauges. Finding a nailer that gives you a wider nail range will save you a lot of money on buying nailers for different nail sizes.

Carrying Case

Unless you intend to use it in your garage or at home, I always suggest you buy one with a bespoke carrying case. It preserves the integrity of your nailer while making it easier for you to carry it anywhere you need to work.

Replaceable Protective Guards

It's important to maintain constant safety at work, find a nailer that has a built-in or attachable protective guard and of course, make sure its easy to replace.

Swiveling Air Connectors

This is very important for manipulating the nailer in all work conditions. If the nailer doesn't come with such an attachment, then buy one.

Directional Exhaust

This is another safety feature that is mandatory for protection while working. Make sure the exhaust is directed away from your face and body at all times.