his photograph shows the inside of the prototype hollow-fiber metal-organic framework (MOF) membrane module, revealing a hollow fiber MOF membrane mounted in it. (Credit: Rob Felt / Georgia Tech)Scientists at Georgia Tech have developed a new fabrication process that could make large-scale energy-intensive chemical separations cheaper and more efficient.
The researchers believe the new icrofluidic technique for fabricating metal-organic framework (MOF) membranes inside hollow polymer fibers that are just a few hundred microns in diameter can be scaled up to inexpensively provide large membrane surface areas in compact modules.
SEE ALSO: Material That Prevents Plastic From Aging to Benefit Energy Industry
By replacing energy-intensive distillation or cryogenic techniques, these molecular sieving membranes could cut the cost of gaseous and liquid separations, reduce energy consumption—and lead to industrial processes that generate less CO2. The researchers have demonstrated that membranes produced with the new technique can separate hydrogen from hydrocarbon mixtures, and propylene from propane.
Development of the membrane fabrication methodology was described in the July 4, 2014, issue of the journal Science (see footnote).
“This work opens up new ways of fabricating molecular sieving separation membranes using microscopic hollow fibers as a platform,” said Sankar Nair, a professor in the School of Chemical & Biomolecular Engineering at the Georgia Institute of Technology, and one of the paper’s co-authors. “Many of the separations that currently are done with energy-intensive techniques could one day be performed with membranes fabricated by a scaled-up version of our methodology.”
Energy-intensive chemical separation processes are widely used in the industrial production of petro-based and bio-based fuels and chemicals, as well as a variety of other technological materials. The most common separation technique is distillation, which applies heat to chemical mixtures to drive off specific molecules according to their boiling points. Other techniques, such as crystallization, involve cooling to lower temperatures to separate the molecules from the mixtures.
In contrast, molecular sieving membranes use semipermeable materials to separate molecules from mixtures that are produced by chemical reactions or found in raw material feedstocks. The process may be driven by a pressure gradient, and relies on the membranes to preferentially pass certain molecules through their pore structures. Crystalline materials known as zeolites have been fabricated into membranes, but high membrane fabrication costs and a limited selection of materials have prevented their widespread use.
Metal-organic framework (MOF) materials offer an alternative with more benign fabrication methods and many thousands of material types available. But before MOF membranes could be used on a large scale, researchers had to find ways of producing them at low cost in large volumes.
Georgia Tech professors Sankar Nair (left) and Christopher Jones (right), with graduate student Andrew Brown, who led the membrane fabrication work and holds a metal-organic framework (MOF) membrane module. (Credit: Rob Felt / Georgia Tech)
The Georgia Tech technique for producing MOF membranes takes advantage of the large surface area that can be obtained by using large numbers of hollow fibers spun from inexpensive polymers. For instance, a one cubic meter hollow-fiber membrane module could contain as much as 10,000 square meters of membrane area.
The new fabrication process relies on a microfluidic technique for bringing the different reactants needed to form MOF membranes into contact inside the fibers. The inner diameter of the fibers may be 100 microns or less, limiting the amount of reactants present and changing the interplay of the physical and chemical forces that control membrane formation. By adjusting the flow and positioning of the reactants and their solvents, the researchers learned to control the location of the MOF membrane films, allowing their formation on the inside or outside of the fibers – and even within the structure of the fibers.
“We have combined a high-performance MOF material with a new fabrication technique to come up with a membrane that can be scaled up in an inexpensive way,” Nair explained. “A key realization behind this development is that if you want to scale up MOF membrane growth using hollow fiber modules, you have to first learn how to scale down their growth in the microscopic environments of individual hollow fibers.”
Once the researchers learned to fabricate a functional membrane using a single hollow fiber, they could simultaneously fabricate membranes in parallel on multiple hollow fibers that were pre-assembled into a module. The research reported in the journal produced membrane films made of the MOF ZIF-8 inside three fibers simultaneously. Ultimately, Nair believes large bundles of the polymer fibers could be pre-assembled into modules and then coated simultaneously with molecular sieving MOF membranes.
An important next step for the research is to develop a better microscopic understanding of the process.
This close-up photograph shows the prototype reactor module used to fabricate hollow-fiber metal-organic framework (MOF) membranes at Georgia Tech using the interfacial microfluidic technique. (Credit: Rob Felt / Georgia Tech)
“To optimize this technique and scale it up to thousands or even millions of fibers at a time, we need to dig deeper to understand how the chemical reactions and molecular transport processes leading to membrane formation can be controlled under the microscopic conditions that exist within the fibers,” Nair said.
Though the researchers have so far demonstrated the functionality of their membranes in gaseous separation processes of interest to the petrochemical industry, the membrane processing technique could have broader applications.
“The approach we have developed could open the door to a whole new class of molecular sieving, polycrystalline film membranes,” said Christopher Jones, a professor in the School of Chemical & Biomolecular Engineering and another of the paper’s co-authors. “Such membranes could revolutionize how oil and chemical companies carry out gas and liquid separations, for example, by replacing energy-intensive and expensive cryogenic distillation processes with more energy-friendly membrane separations.”
This work was supported by Phillips 66 Company.
Brown, A., Brunelli, N., Eum, K., Rashidi, F., Johnson, J., Koros, W., Jones, C., & Nair, S. (2014). Interfacial microfluidic processing of metal-organic framework hollow fiber membranes Science, 345 (6192), 72-75 DOI: 10.1126/science.1251181
