Did you know that the right dryer vent hose can make a big difference in how safe and how efficient your dryer is? That hose helps hot air to exit the dryer and controls where it goes. If the hose isn’t working properly, then it may need to be replaced, as your whole dryer may be affected.
Before you buy a new one, check out our reviews and find out about the best dryer vent hoses on the market.
What to Consider Before Buying
There are a few things that you should keep in mind when looking for the best dryer vent hose to suit your needs. These include:
- Flexibility- According to DryerBox.com, you don’t want a rigid dryer hose, such as one that is made out of plastic or vinyl. This ensures that the hose doesn’t break apart or becomes overly stressed and that it allows hot air to flow freely.
- Length– Your dryer hose needs to be long enough to get hot air over the entire distance from your dryer to the vent. You don’t want to have to improvise using substandard materials to cover the whole distance. Measure the length you will need before you buy the hose and then give yourself just a little extra hose to work with, just to be on the safe side.
- Joint security– You want to make certain that the joints can be secured with tape and not screws, as using screws can cause lint to collect inside the vent. If the hose manufacturer says that screws or another sharp object are required to hold the hose in place, they haven’t given much thought to how the hose should work and their product should be avoided.
- Weigh between cost and durability- You may not have a lot of money to spend on an dryer vent hose, but you may also want a decent quality one that will be worth your investment and that lasts you for a while. It can be tough to balance those two factors, but if you read reviews thoroughly and find out how well some of these stations may actually perform, you should be able to find one that meets your needs.
Top 5 Best Rated Product Reviews
Now that you know what to look for when buying a vent hose, here are the top products on the market today. We based our picks on affordability, durability and suitability for a wide range of consumers. Keep in mind that just because we recommend a vent hose, that does not mean that it will be a good choice for you. Read the reviews carefully, look at the product descriptions before you buy it and ensure that you are getting a hose that suits your needs and is compatible with your dryer and vent.
iPower 4 Inch 8 Feet Non-Insulated Flex Air Aluminum Ducting Dryer Vent Hose
This is a very simple, aluminum hose with standard quality materials. It’s a good price and good value for what you get, but it isn’t designed to be incredibly long lasting or offer a lot of quality features that make it a good investment. This is what you get if you want something decent on a budget. It’s adaptable and will fit well with most dryers and vents, and if it breaks down (tears, punctures or becomes otherwise damaged) the loss isn’t that substantial. It is rated as the best vent you can buy for this price range by thespruce.com, so you know you are getting a lot of value for your money.
Pros
- Fireproof.
- Flexible.
- Inexpensive.
Cons
- Will not last very long compared to other products.
Deflecto Easy Connecting Dryer Vent Hook Up Kit
This is more of a premium dryer vent hose. It costs a bit more and is designed to last longer. It is semi-rigid but still flexible, which allows it to be perfectly functional and operate as a dryer hose but also enables it to last longer and reduce the risk of tearing and other problems. The strip gasket is flexible, which makes it easy to install, but it also puts it at risk of coming loose later on. You ideally want a rigid connector, but this one may work fine for you. This is incredibly easy to put together and fit, so it’s great for people who don’t want anything stressful or time-consuming to deal with. It if does become unhooked, then it will be very simple to re-hook it.
Pros
- Easy to install.
- Tough, semi-rigid piping.
- Reasonably priced.
Cons
- Fit is not very secure, due to flexible gasket.
BUILDERS BEST 111718 Elbow Kit, 4-inch by 8-foot
This flexible hose may not be allowed by your building code. As with all flexible hosing, there is a chance that your building code will require you replace it with something rigid, according to TheSpruce.com. Be sure to get updated with house rules before you buy it. This comes with an elbow joint already built into it, and that makes it convenient for a lot of people, but it can be inconvenient for you, depending on how your dryer is situated in relation to your vent. Keep in mind that some dryers may need to be moved around a little bit to accommodate the vent hose you buy.
This 8-foot long dryer hose works with most dryers and most vents, and it is a good buy for your money. It’s more expensive than the other choices we have looked at so far, but it is a high-quality product that should last you for a very long time, and it is resistant to all kinds of damage, including crushing and tearing.
Pros
- Very durable compared to other flexible hoses.
- Built in elbow can make it incredibly convenient for tight spaces.
Cons
- Installed joint may be hard to work with.
- Flexible design may not be suitable for all buildings.
Dundas Jafine BTD48TC ProFlex Clothes Dryer Transition Duct UL 2158A Listed
This 8-foot hose is very flexible, so once again, you need to ensure it is suitable for your building and whatever codes it may have in relation to dryer hoses. It is made of thick, 4-ply aluminum foil, which makes it very durable, but not rigid. It’s one of the best dryer hoses you can get, and it is incredibly flexible yet reasonably tough. It’s also priced affordably and is less expensive than any rigid hose, which is why many consumers prefer it. It creates an airtight seal when installed properly, and it has been designed to be easy to install. If you need to shorten the hose, it can cut easily, making it very convenient to install and get just what you need out of it.
Pros
- Very durable.
- Easy to set up.
Cons
- May not be suitable for your building.
Deflecto Aluminum Duct with Connectors
If you want something fairly rigid and very tough, then this is the hose for you. It is made from sturdy aluminum, and it is not likely to burst or puncture. It offers long-lasting operation that makes it an ideal choice for businesses or homes where the dryer is going to be used often. It’s not something you are going to have to worry about breaking down or loosing shape because you move the dryer. It cannot be adapted to different settings very well though, as you won’t be able to easily cut through it and shorten it, if it is too long. It is still somewhat flexible, despite being so durable, but it is not as flexible as many of the other choices we have listed here. That makes it ideal for buildings where the codes are a bit stricter and require a semi-rigid dryer hose.
It’s also priced very affordably for what you get, and what you get is a hose that can be stretched up to 24 feet, but it can be compressed down to about a foot. That’s a lot of hose to work with, so you should not have any need to cut it or otherwise modify it to make it work for you.
Pros
- Will last for a long time.
- Very affordable.
- Semi-rigid but still quite flexible.
- Contracts and expands according to your needs.
Cons
- Not as strong when pulled to full length.
Conclusion
Now that you have seen our top choices for dryer vent hoses, perhaps you know what you want to buy for your home. Just remember that not all vents and hoses are the same, and you may need to be careful about what you pick and how suitable it is for your needs. If you live in a building, make sure to find out if there are any restrictions regarding which kind of hose you can use. This can save you a lot of time and money. Also, be sure to consider your dryer’s setting, as this will affect the length of the hose you need, how flexible it needs to be, etc. After careful consideration, the above list will have you covered in the majority of settings.
