Backyard drainage solutions - Backyards of poor drainage causing stagnant pools of water on your lawn that weaken plant roots serve as breeding grounds for disease organisms and weaken the foundations of a nearby building after a heavy rain. Most problems are caused by draining clay soils or incorrectly inclined yards. Installing French drain, or a linear series of underground pipes, directs water from a drainage bad part of the backyard to a predetermined exit point, preventing the accumulation and pooling around grass or plants.
Fix a backyard drainage solutions, Draw your backyard on graph paper to determine the path of the French drain will take. Include the locations of roads, trails, trees and plants, so that you work around them. Also, include the exact location of underground utility lines after marking on the ground with chalk powder. Draw a dotted line in the sketch to determine the path of the pipes from the drainage wrong part of the backyard to the area where you want the excess water to flow, usually an area with natural vegetation. Spread chalk dust on the floor in your backyard to mark the route of the French drain will take. See detailed sketch of the exact location of the drainage system. Measure the length from one point to another to estimate how much tubing you need.
Dig a trench that is 10 to 12 centimeters deep and 5-6 inches wide over the chalk marks. Because the backyard drainage solutions system depends on gravity to transfer the water, the slope of the trench by 1/4 inch per foot to help excess water to flow out of your house or plants in the backyard. Tamp the excavation with a hand tamper to firm the soil. Agricultural fabric Baja on crushed rock. Place drilled along the trench, with drain holes down tubes. Cover the top of the tubes with excess agricultural fabric stretched over the walls of the trench. Pour the gravel into the ditch, just above the perforated pipe to within 4 inches from the edge.
