A lot of broadband router manufacturers are using 192.168.1.2 as the default ip address. D-Link is one of the most common router brands which are using it as the default internet protocol address when connected to the internet. The users who are connected to such network can easily modify the settings of your routers by just visiting the http://192.168.1.2 address from your web browser. Some other devices are using it as the default ip addresses as the D-Link are Philips, Senao, and etc. The network enabled computer, printer, scanner, or any other device on this local internet network can be easily assigned to this ip address. A single device has to be assigned to this particular internet protocol address at once.
Understanding 192.168.1.2 IP address:
While connecting to the local wireless network, typing 192.168.1.2 this address will bring the network users to the router’s login screen. Once logged in to the router configuration page, you can able to access all settings by entering the default username and password. Every router has a default username and password set by the manufacturers at the factory as the default ip address. If nothing is assigned to this ip address, then you will get a redirect error in your web browser.
Accessing this ip address from outside of the network will not redirect you to the configuration page of the router. This internet protocol address 192.168.1.2 can also be reassigned to other devices which are connected in the network. Everyone who is using the wireless network in your home or office has to be familiar with this ip address and how to configure it for your needs. The average person can also visit this above mentioned location from your internet browser in order to change the password of the router or troubleshoot any of your network problems.
What can you do with IP address 192.168.1.2?
If you have logged in to the 192.168.1.2 ip address of the router, then you will get a full access to the entire wireless network as authoritative. In the configuration control panel page of your wireless D-Link, Senao, or Philips routers, you can easily make the necessary repairs and changes in the settings. If you give full access to the administrator panel of your router device is proxy, DNS, Wifi (WLAN), network management, virtual routing, WAN protocol settings, IP QoS, LAN, NAT virtual server, DHCP Client, DMZ, ADSL, WPS, DSL, various security options, MAC, and blocking, and you can make various base adjustments in the settings in an easier manner.
To do this with your wireless router device, first of all you need to know the default username, password, IP address and some other necessary information regarding your router. Most probably you can see all these information at the bottom of your device or check in the manual given by your router manufacturer. By knowing all these information, you can easily log in to the 192.168.1.2 ip address and do these changes in the settings and configurations page.
