The IP address 10.0.0.1 is a default one often used in the different types of network routers including the branded routers like Cisco. This type of IP address is also used by the private network servers and can be accessed through this site http://10.0.0.1 in a web browser. However, this default IP address is also known as the default gateway address, which typically represents in the router connection inside the local network. Nowadays, the default IP addresses are most commonly used in the business networks than the homes that are often available in the range of 192.168.x.x series. The default subnet mask for 10.0.0.1 IP address is 255.0.0.0.
If your router is using 10.0.0.1 address on the local network, you just log into the router’s console by connecting a web browser to http://10.0.0.1. Mostly, these IP addresses are set as a default address by the manufacturer in the routers like D-link DSL and Belkin. However, this IP address can be used only inside the local network and if you set to use it in public, you will get some IP address conflicts so it is possible to use only one device on the network. In case, if you are in need of using the address in the public network, you must use the public IP address in your router.
How to use 10.0.0.1 IP address?
Basically, the IP 10.0.0.1 is a default password that allows the user to change the LAN address based on their needs. When you make changes in your IP, you can do it manually on your devices. If your network equipment is the combination of modem and route, then the router will automatically set it to the default IP address. But, you have an access to change the specific IP to 10.0.0.1. In order to troubleshoot this issue, you need to give the static IP address to the router in various segments from your modem. You can also change the static IP of your server to the specific range of the router.
- Once you decide to change your IP, first of all you need to connect to the internet and open the wireless connection windows.
- If you have no problem in finding wireless signals, you can access the internet through free hot spots in all around the local area when you want.
- One of the most important things to be considered is that whether the admin interfaces are set to default IP.
- If you encounter the problems, you just reset the router and try to reconfigure it.
Find the default IP address for a net gear router
Commonly, the home-based broadband network routers are using the default IP address. This enables the user to have easy access their administrative functions for the router setup at first time. It is the default one and only accessed in the local private network. However, the default IP address for net gear router is 192.168.0.1, but you can change it to this private IP address 10.0.0.1 for connecting to the internet.
