Since the launch of the PlayStation 5 on November 12, Sony has begun feeding the last remaining morsel about its next-generation console. One of its new blog posts showed the PS5's complete manipulation, which revealed some interesting tidbits about the device's components.
Before removing any components, Yasuhiro Oteri, vice president of mechanical design, pointed out the ports on the console. There are two USB ports on the front, one USB-A and another USB-C, the latter of which is missing on the Xbox Series X and Series S. The USB-C port is capable of up to 10 Gbps, as two are additional USB-A ports on the back of the device, where the Ethernet jack, HDMI port, and power connector are all located.
The stand was shown to screw into the bottom of the system, and could be removed with a flat head screwdriver. The same stand is used for the console when it is placed on its side, and there are markings on the paneling to indicate where to clip the circular base for this configuration. A neat addition to the stand is a small slot, where additional screws required for vertical orientation can be stored when not in use.
User-removable side panel
The most interesting reveal, which confirms the ongoing rumors around gaming forums, is that the white side paneling on the system is user removable. This design allows the owner to access two dust traps built into the system, giving them the ability to simply vacuum any debris drawn by the system's fan. This is excellent, given the panic of dust, some people will know what will happen when removing the PlayStation 4 shell.
User removable side paneling means that Sony could possibly sell additional panels for players to customize their consoles. This original launch was an option for the PS4, with a portion of the top paneling capable of covering removable hard disk drives offered by Sony for a handful of options, though most of the console was a Remained the same color. With both side panels on the PS5 removable, users can create a completely different console without the need to purchase a limited edition unit.
The unit was torn to PS5 with a disc drive, with sheet metal casings and two laces of insulation to reduce any noise from the spinning discs.
It seems easy to upgrade storage
Before Outeri dove into the motherboard, it pointed to a user-accessible extended storage slot that accepts M.2 NVMI PCI 4.0 solid state drives. These are the latest versions of SSDs that allow for incredible storage speeds. Next-gen systems are enabled. However, with the Xbox Series X / S, users will need a proprietary expansion card made by Seagate offering this technology, currently priced at $ 220 for 1TB. This is currently the price of an off-the-shelf 1TB SSD of a similar architecture, but with new standards dropping relatively early, expandable storage for the PS5 may be less expensive and more flexible. long run.
One of the biggest issues with the PS4 Pro is the amount of noise its fans were making to compensate for the heat that the system was outputting. The big reason for the PS5 is to help thermals, but Oteri also pointed to the system's custom liquid metal thermal conductor, which took years.
In addition to this proprietary thermal conductor is the system's heat sink, which is custom designed to achieve the same performance as a vapor chamber.
Sony seems to have done a great deal of engineering in the PlayStation 5, to ensure that overheating and fan noise are problems in the past, and with excellent customization options for side paneling and expandable storage, one of the PS5 technology Impressive piece.
Editors recommendations