Product Review: DIY Driftwood and a Coupon Code

I wanted to share a very cool product with you guys.   Have you heard of DIY Driftwood?
Its a simple, non-toxic solution that gives bare wood  the look of aged driftwood in one easy step. 
Check out the range of tones it creates on different woods:
I was contacted by Kim, the brains behind the product, and she asked me if I would like to give it a try. I have done a "painted" driftwood finish in the past,  but this looked much easier and didn't require all the layers of paint, so of course I was game.
She is also being very kind by offering up my readers a 20% off Coupon Code.
 Just use code: OVERLAYS at checkout.
Good until 7/5/13!
 I had the perfect test subjects in mind- plain old pine IKEA and this old oak table:  I had "limed" it a few years ago, but it still wasn't working for me. I had big plans for it and wanted to put it in our new sunroom, it was just still too "brown". before
The new sunroom, as you saw yesterday, is bright and beachy, so I was all for soft faded grays. after
So here is what I did.
(Warning- nothing ever goes "just as I planned" with me, so get ready for a one of a kind review)
First off, you will want to start with relatively clean, bare wood. I did a light sand to mine and I was ready. I opened up my pretty packets of Driftwood Finish and followed the instructions, mixing the packet with one cup of water. The actual product kind of looks like bath salts and is non-toxic. You can brush or roll it on... And thats it.
The directions recommend letting it dry in the sun, which accelerates the process. You can already see the graying out of the wood happening after a few minutes: Here is a side by side about 20 minutes later.   (It was partly cloudy the day I did it.) Next I brushed out the table top and base: and I was amazed by how fast it changed it to a pretty charcoal gray finish in just minutes! *FYI, different woods react differently.  The more porous the grain the bigger the change- so that means oak and mahogany will go darker.  Check the chart in the first image.*
The packet recommends sealing your finish with a wax.   There is a reason for this as I quickly learned.  I finished the table, placed it in our new sunroom and got sidetracked before sealing it.  Meanwhile my husband sat down at our new table with a glass of water.  Uh-oh! He left a bunch of ring marks!
That will teach me to follow directions and not my ADD.
I contacted Kim and she suggested wetting the area and putting it outside in the sun to have it even out.
Problem was I already assembled the table and it wasn't going to fit out the door, so I decided to try reapplying more solution to the area and sliding the table over to a sunny spot in the room. First I wet the area, then reapplied to the rings. This probably would have been just fine, but I decided to second coat the entire table to make sure it will all be even.
Guess what?
A second coat deepened the color MUCH more than I expected... It was a nice shade, but now too dark for my beachy scheme.
I thought about putting a white "lime" wax over it to lighten and protect it.
 I knew that would work just fine,
but since I was playing guinea pig I figured I test out some other avenues for this product.
(Hope you don't mind Kim!)
I remembered  I had a can of Zar "Coastal Boards" stain leftover from my dining room table.
It was an oil based stain, and I wanted to see how it would react, so
I did a little test patch.  I liked what was happening, so I rubbed it all over the table... and wiped it off with a clean rag: a perfect gray/ happy accident!
I rubbed it over the legs and I was done. I considered adding a clear flat varnish to completely seal it,  but it stood up to the water glass test this time.
 Next up I was a pine IKEA Rast.
I did a test spot on the inside of a drawer and was instantly excited by the result: So I brushed it on and let it sit in the sun: But I was let down by dear old IKEA.   Here is the problem, their furniture is made of several pieces of pine stops glued together, so it didn't take evenly.  Some strips were darker while others barely changed...  Pine changes to a much lighter than oak  I wondered if several coats might darken it up more, but I had run out of solution  at this point.
This would have worked great for a solid pine dresser though.
Other great ideas to use this product for you ask? I started to think about all the dated "yellow oak" out there, especially on cabinets and vanities.
How much nicer would they look grayed down?
Then there are the outdoor uses... Having to patch an old weathered fence.  I bet this would accelerate the weathering in no time! via bring-joy.com
outdoor furniture
 Here are some more images from DIY Driftwood:

I even thought about inexpensive wood frames from hobby shops...  speaking of hobby shops they have rows of unfinished wood!
Overall I think this is such an easy product to use, and next time I will definitely seal it once it dries! I think it is great for raw wood, or wood that needs minimal sanding. For wood that has been polyurethaned, the finish will need to be stripped or sanded off so that it can penetrate the wood, so as long as you are up for it I say go for it!
Please check out Kim's site and shop and be sure to use code OVERLAYS for 20% off! Its such a simple genius product  and I love a good entrepreneur story. Thanks so much Kim for letting me test this out!