We drove our bus to our first supplying client, the restaurant where Darcy had been working. Consistent with what we would find throughout the rest of our three-month journey, the owner of the restaurant was encouraging in our endeavors, but could assist us little more than vaguely pointing us in the direction of the grease bin out back. Not knowing what we were getting ourselves into, literally and figuratively, we came with no supplies other than ourselves. We looked down into the large metal bin of used frying grease at our reflections, and wondered how we were going to scoop out the oil. We grabbed a gallon milk jug out of the recycling, cut off the top, and made ourselves a scoop. Then we proceeded to reach waist-deep into the grease bin and pour the oil into the 50-gallon plastic storage drum we had in the back of the bus. This was our first experience collecting oil, one that believe it or not, was not significantly altered for the duration of our trip.
With time we did make slight improvements to our collection methods. For instance, we purchased fashionable mechanic jumpsuits to protect our clothes. To store backup oil on the bus, we obtained numerous 5-gallon oil containers, referred to as “cubies,” that restaurants receive clean oil in. We did not, however, advance beyond our reliable milk-jug scoop.
With a seemingly functional filtration system installed, we set off on the first leg of our journey from Tahoe to Boulder, Colorado, testing our bus in the high-altitude mountain town of Breckenridge on the way. After hitting several lucrative Japanese restaurants on the way out of Carson City, enjoying our first night sleeping in the bus in Eureka, Nevada, and breaking down momentarily due to a clogged engine filter in the middle of Utah, we arrived safely in Boulder where we continued to fine tune our system and work on the interior decorating of the bus.