You will need: 10 foot 3/4" pole (I got a galvanized metal pipe for $1.59 from Home Depot), a metal circle that fits onto the top of it (I have no idea what the proper term is called, but show them the picture or go to the plumbing section), a wooden circle 8" (mine is from Joann), nails (with a top that is wider than the 4 small holes in the metal circle), glue that holds metal, white spray paint, thumbtacks, ribbon (I got 18' ribbon from Joann)
Step 2: Add some glue onto the top of the metal circle and to the bottom of the wooden circle in the center that fits the width of the metal circle. Leave it to dry.
Step 3: When it's all dry, add in the nails into the four small holes.
Step 4: Spray paint it all white. Let it sit over night.
Step 5: Find the center of the ribbon and center it onto the wooden circle. Tack both sides of the ribbon onto the circle.
Step 6: Take your next ribbon and do the same. Continue adding on more colors. Each side of the ribbon will be for one dancer.
Step 7: If you're adding flowers, use a circle flower oasis from the craft store. Use wires to secure it onto thumb tacks.
TO PUT THE MAYPOLE INTO THE GROUND:
Materials: 4' rebar 1/2", hammer
Step 1: Hammer the rebar into the ground. Here the ground was so hard we only got it in about 5", but it was secure! Step 2: Slide the pole onto the rebar. If needed, dig the pole into the ground a bit too.