Your toilets get used numerous times every day. Ensuring that they flush correctly is vital to having bathrooms that function as they should. A slow flushing toilet could mean there is a blockage in your pipe. It could also mean that the mechanisms in the take could be broken, or there may be an issue with the water levels in your tank. Any of these problems will mean that your toilet isn't working properly and as efficiently as it should be.
A toilet that isn't working can be an annoying problem. Many of us take our toilets for granted until they start acting up. While a toilet may seem like a simple device, they are quite complex. There are numerous mechanisms inside that work with your home's plumbing system to flush waste out of your house and into the city sewers. When one of these mechanisms stops working, your toilets don't work as they should.
Fortunately, most problems can be solved quickly and inexpensively at home. With a few easy fixes, you can have your toilet flushing properly in no time. Fortunately, there are different ways to get your toilet working properly and flushing quickly in no time. Your best solution is to contact a plumber for assistance. However, you may also be interested in troubleshooting the problem by yourself.
Here is how to make your toilet flush better:
Check for toilet blockages
If your toilet isn't flushing correctly, there is a good chance that it may have a blockage. A blockage is usually caused by waste, toilet paper, or other debris blocking the plumbing.
If you have any reason to suspect that there could be something clogging up your lines, grab your plunger and move on to tip number two.
Use your plunger un the toilet
Plunging your toilet is one of the best methods to remove any type of blockage from your toilet. There is a specific technique that you should use, and once you get the hang of it, you will be able to unclog any plugged toilet.
First, insert your plunger into the toilet bowl and create a tight seal around the drain opening. You must ensure the seal is tight and there are no gaps between the plunger and the inside of the toilet. Then in a fluid motion, plunge the plunger up and down, ensuring that it never loses contact with the bowl.
After a few plunges, flush your toilet and see if the water flows freely. If it does, your job is done. If not, continue to plunge until your toilet normally flushes once again.
Try some bleach
Bleach is a common ingredient that most people have in their homes. It is excellent at breaking down debris and can remove mineral deposits in a toilet. To use bleach to help your toilet flush properly, simply pour one cup of bleach into the bowl and allow it to sit for fifteen to twenty minutes.
Afterward, dilute with boiling water and sit for fifteen minutes again. Flush the toilet a few times to allow the complete bleach solution to rinse through the plumbing. Afterward, you should find that your toilet is running properly again.
Use dish soap and boiling water
After plunging your toilet, there may still be debris remaining in your toilet and plumbing system. If you don't have bleach, another excellent solution is using a mixture of regular dish detergent and hot water. Just as this combination will get a sink full of pots and pans sparkling, it will do the same for your toilet.
To try this method, pour one cup of dish soap into the toilet bowl and allow it to sit for approximately twenty minutes. Next, boil a kettle of water and carefully pour it into the bowl, and flush as you do so. This should remove any soap residue and last bits of waste and debris out of the lines.
Flush the toilet with vinegar
Along with bleach and dish soap, vinegar is another excellent option to help your toilet flush better. It is also an inexpensive method found in most household kitchens. The acid in vinegar makes it excellent at dissolving any built-up mineral deposits. These deposits may be causing your toilet plumbing to block up, making it flush slowly.
To use this method, place a cup of vinegar in the microwave and heat it until boiling. Be very careful not to burn yourself, slowly pour the vinegar through the toilet overflow tube located inside the tank. It will trickle through the rim holes and siphon jets, where it will dissolve any built-up residue.
Allow the vinegar to sit for twenty minutes, and then flush the toilet to rinse it away. You should notice a considerable difference in how well your toilet flushes afterward.
Change the toilet's water level
The water level in your toilet tank will affect how well your toilet works. A water level that is too low may not provide sufficient power to flush your toilet correctly. The proper water level should sit no more than one inch below the top of the overflow pipe inside your tank.
The float ball in your tank controls how high your toilet's water level is. Use a screwdriver to loosen or tighten the float to change the water level. The higher the float, the higher the water level will rise.