How To Fit Valves To A Radiator
In this guide, we show you how to upgrade your old radiator valves with TRV’s.
By doing this you’ll be improving the efficiency of your heating system.
Watch the video guide or follow the simple steps below for full instructions on how to install TRV’s to a radiator.
Before buying TRV’s you’ll need to decide what style you want – angled or straight – use our Radiator Valve Guide to help you make the right choice.
Also, it’s important that one radiator in the house hasn’t got a TRV fitted, this is to create a bypass should all the TRV’s knock off.
What Tools Do I Need?
You will require –
How Do I Install TRVs?
So let’s get started on putting some new valves on your radiator!
Step 1 – Remove The Old Valve
Begin by removing the old radiator valve and tail using the pump pliers and an adjustable spanner.
Step 2 – Cut The Olive
Using the hacksaw cut a line through the olive, but be careful not to nick the copper pipe.
Step 3 – Split & Remove The Olive
Using the flat-headed screwdriver split the olive and remove it.
Step 4 – Wrap Up Your New Valve Tail
Once that’s done, wrap the PTFE tape clockwise around the radiator valve approximately 17 times.
Step 5 – Insert Tail & Fit Valve
Put the valve onto the tail and knock it on with the adjustable spanner to ensure it’s fully pushed into the valve.
Then, hold the valve with the pump pliers and nip up the tail nut using the adjustable spanner.
Once the TRV’s are fitted you’ll then need to fill the system back up.
Don’t Forget To Let Us Know!
If you’ve got any burning questions or need advice from the experts, be sure to send in your questions.
We may feature them in our next blog post, too. Questions can be sent via the comments section below, Facebook or Twitter.