You’ll Need
- 5 Wooden Dowels, 1/2″ thick {40″ long for Pets – 60″ long for Children}
- 1 1/2 yards Drop Cloth or Printed Fabric, of choice {cut into 60″ W X 30″ H}
- 3 yards Rope or Ribbon
- Scissors
- Tape Measure
- White Chalk, to mark on fabric
- Iron-On Hem or Needle & Thread
- 1/2″ round Non-Slip Rounds
Before cutting your fabric, measure the length of your dowels from the ground to about 6″ from the top. This is the length of the fabric you’ll need.
For the cover of your teepee, you’ll need to create a half-circle shape from your fabric. The radius of the circle will be the same size as the height of your dowel, so around 34″ for pets’ 40″ dowels and about 54″ for kids’ 60″ dowels. Fold your fabric in half, and starting from one corner of the folded sides, measure out 4o inches and mark it. Pivot the measuring tape to create the half circle shape, keeping one end at the corner and marking at 40 inches. Continue pivoting until you’ve made an arc on the fabric, then cut it out.
If you use a simple painter’s canvas you can use this teepee for outdoor fun! But it works perfectly indoors too, and is the best fabric if you want to paint a custom design.
To tie your dowels together, you can choose a method you prefer but I suggest starting with 2 dowels placed vertically next to another, then cross one dowel to create a “T” 6″ down from the end of the dowels. Place non-slip rounds on the end of each dowel that will be placed on the floor.
Start by wrapping the rope around the crossed dowels by “X”, and then taking the longer end of the rope and tucking it underneath the “X”. Next, take the longer piece of rope that you tucked under the “X” and wrap it around the three dowels about 8 times. Open the 3 secure dowels to create a tripod that stands up on its own. Then add the remaining 2 dowels, and continue to tightly wrap the rope between the dowels over the rope already there. Continue to cross the rope over and over, then knot to secure. Don’t wrap the rope too tightly around the dowels, or else you won’t be able to adjust them to fit your space.
The front two dowels should create a 26″ opening, with the other three spaced about 15″ apart from each other. This of course depends on the size you want or if using taller dowels for a children’s sized teepee, then the opening would be wider.
Wrap cut fabric around the dowels, securing with pins down until the desired size opening. Using iron-on hem or needle and thread, secure the fabric ends together. I prefer a larger opening in the fabric but you can choose to glue the fabric further down, to make a small opening.
Make a small slit on each fabric piece, on the top of the glued section, so it doesn’t fray. Loop the string through and tie a bow.