Given below are a few tips for cleaning and maintaining marine upholstery:
Cleaning Off Mould : In the beginning, any growth of mold or mildew accumulating on the vinyl upholstery of the particular marine vessel will have to be cleaned off. They generally begin to grow after a period of disuse. Sometimes they may be found even on the seats of boats that were covered properly. Using a solution containing ½ cup of hydrogen peroxide, 1½ cups of water and a little bit of ammonia is ideal. It is essential to scrub the top, bottom and seats of the boat until all the mildew has been removed. Protective latex gloves should be worn during the task.
Making Use of A Cleaner :One can also use a homemade cleaning solution for eliminating the dirt and grime on vinyl upholstery of a boat. First, the solution will have to be made by mixing 2 tablespoons of dish-washing soap with around 2 litres of water. After the mixture has been combined thoroughly, it must be applied on the vinyl surfaces and allowed to stand for a few minutes. The vinyl upholstery can then be scrubbed until all stubborn dirts have been removed, and later wiped down using a piece of clean rag.
Applying Vinyl Protectant :In order to make sure that the upholstery fabric does not fade colour, or crack and dry in the heat of the sun, a vinyl protectant must be applied for protection. However, one must be careful so as not to use something that is incompatible with vinyl. It can cause the fabric to dry out inadvertently.
Considering Repairs :If it is found that the marine upholstery has got damaged, one should better seek professional help. Repair should always be considered as a viable option if the damages are not too severe. However, replacement would be a better choice in case of extensive damages.
Cleaning and maintaining marine upholstery can help to ensure that it lasts for a longer period of time and retains its good-as-new look.