Changing your truck's engine oil at regular intervals isn't just good maintenance, it's the absolute best way to keep the engine running optimally throughout its life. As the heart of any truck, the engine requires proper lubrication to avoid internal damage or dirt and sludge build-up. Luckily, changing your vehicle's oil doesn't cost a lot and is a fairly simple process. In this article, we will look at the best oil for Ford's 6.7 Powerstroke and why it's important to spend on good quality oil.
Shell Rotella T6 Full Synthetic 5W-40 Diesel Engine Oil (1-Gallon, Case of 3)
Ford Genuine Fluid XO-5W40-5QSD SAE 5W-40 Full Synthetic Diesel Motor Oil - 1.25 U.S. Gal CASE OF 3
Lucas Oil 10299-PK4 Synthetic 15W-40 CJ-4 Truck Oil - 1 Gallon Jug, Pack of 4
Genuine Ford Fluid XO-15W40-5QSD SAE 15W-40 Super Duty Diesel Motor Oil - 5 Quart Jug
Schaeffer Manufacturing Co. 0700CK4-006S SynShield Durability Advantage 15W-40 Diesel Oil, 1 gal, Bottle
Recommended specifically for Powerstroke
Suitable for various vehicles
Shell Rotella T6 Full Synthetic 5W-40 Diesel Engine Oil (1-Gallon, Case of 3)
- For best performance, follow the manufacturer's recommendations in your vehicle owner's manual.
- Provides 1. 5% improved fuel economy performance compared to SAE 15W-40 oils
- Triple Protection Plus formula combines fully synthetic base oils with advanced additives for excellent equipment protection and long engine life
- Formulated with additive technology that protects against the effects of soot, dirt and other contaminants
- Engineered with shear stability to resist viscosity loss and maintain optimal engine oil pressure
Let's move onto something that's a bit of a no-brainer, the Shell Rotella T6. For many 6.7 Powerstroke users, this fully synthetic option is the go-to oil thanks to its all-round capabilities. It does a good job of resisting viscosity loss through shear and will maintain the optimal pressure of your 6.7 Powerstroke. Additionally, the oil also helps maintain emission compliance and heat resistance with its formulation of synthetic base oils.
Guaranteed improvement in gas mileage and smoothness
This fully synthetic 5W-40 oil for 6.7 Powerstroke promises noticeable improvements in fuel efficiency and smoothness, as mentioned by users who've noticed their truck's mileage and smoothness improving after the break-in period. The users also state that this oil has resulted in quicker cold startups and less knocking when the motor is cold. Adding to the all-round appeal, Shell's Rotella T6 can be used in all Powerstroke applications be it the Super Duty series, the Chassis Cab range, or the F650/F750 medium-duty trucks.
Shell Rotella T6 fully synthetic oil is exactly what your 6.7 Powerstroke needs to work consistently in changing environments. As we said earlier, it's a no-brainer choice given the fact that it comes from Shell, one of the leading producers of motor oils. The brand makes some of the best synthetic oils for a wide variety of vehicles and the Rotella T6 is no exception. It reacts efficiently to the different temperatures and requirements of the metal-to-metal contact points in the 6.7 Powerstroke at different speeds. Overall, it's the ideal spec and grade of oil for your truck if you are seeking more gas mileage and smoothness out of your machine.
- All-round performance
- Improved gas mileage and smoothness
Ford Genuine Fluid XO-5W40-5QSD SAE 5W-40 Full Synthetic Diesel Motor Oil - 1.25 U.S. Gal CASE OF 3
- It satisfies the warranty requirements of Ford Motor Company as well as most other domestic and import diesel engine manufacturers
- High-quality diesel engine oil formulated with synthetic base oils and unique additive technology
- Designed for new generation, low emission diesel engines
- Can be used in older engines where the manufacturer recommended API categories CD, CF-4, CG-4, CH-4, CI-4 and CI-4 plus
- Recommended for use in power stroke diesel engines over a wide temperature range, from -20°F (-29°C) to over 100°F (38°C)
This aftermarket offering from Ford itself is meant for heavy-duty applications. The best part of using a genuine OEM fluid is that you can rely on the high quality and effectiveness of the oil without thinking whether the grade of oil would work in sequence with your truck.
Recommended particularly for Powerstroke applications
Meant for service and overworked Powerstroke engine trucks, Motorcraft's SAE 5W-40 is particularly recommended if you use your truck for transport, construction, or hauling purposes. This high-performance motor oil has been formulated using synthetic base oils and provides decent control over soot. Motorcraft also claims to protect against rust, corrosion, and high-temperature oxidation and thickening. All in all, it's a good choice if you drive a Powerstroke Super Duty or Chassis Cab series truck made from 2011 till now.
This particular brand and grade of oil not only protects the exhaust after-treatment systems such as particulate filters from the old Powerstroke versions, but it's also good for new generation motors which are low on emissions.
You can always count on Lucas' Magnum line of oils to give you the ideal amount of wear protection and make the emission control systems in your truck last longer, thanks to the premium additives. It's good synthetic oil that will keep up with how you use your truck and if the past is any indication, it gives the motor better oil pressure, as reported by many users.
Lasts twice as long as conventional 15W-40 oil
The additives used by Lucas are the highlight of this particular oil. You can expect less oil consumption and reduced engine wear if you happen to drive a high mileage truck. Lucas' offering here is likely to make it quieter and smoother sounding than before. Overall, we've heard plenty of good things about it, but the packaging can be improved. There have been instances where buyers have received poorly packaged jugs leading to oil leaks. That said, this isn't a common issue and certainly not a deal breaker so if you are looking for a long-lasting synthetic oil for your Powerstroke Ford pick-up (2011-present), Lucas' Magnum 15W-40 synthetic oil is worth a try.
The key benefits of using this oil are reduced engine wear and oil consumption. Although it's primary application is in heavy-duty diesel engines like Ford's Powerstroke, it can also be used in gasoline engines, so if you also have a gas-powered truck, you can save time by buying in bulk and using the same oil for both engines.
When you spend so much on a Super Duty truck, you want it to last, and for that, you need to keep its motor lubricated with oil that's specifically recommended for it. Motorcraft's Super Duty 15W-40 is a fairly high-quality diesel engine oil formulated with hydro-processed base oils and unique additive technology.
Effective over a wide temperature range
Motorcraft's XO-15W40 Super Duty oil is known to work well in normal and warm climates as well as cold regions. In fact, this oil is recommended for use in Powerstroke motors over a wide temperature range, from down to -20°F (-29°C) to up to 100°F (38°C). Speaking of compatibility, as its name suggests, this second option from Motorcraft is best suited to Ford's Super Duty range of trucks from 2011 to present day.
Generally, the Powerstroke range isn't tied to any particular grade of oil. They usually run rich with fuel at times so if you're looking to opt for conventional (synthetic) motor oil, there is hardly a better option than this. It works well under wide temperature ranges and more importantly, it also effectively minimizes engine deposits and wear.
Schaeffer is among the better known oil brands out there and its 700 SynShield, although not fully synthetic, is a popular choice among Powerstroke users. This 15W-40 grade motor oil provides good durability and longevity even under harsh operating conditions. Using Schaeffer's patented friction modifiers, the oil comes with a slippery, tenacious shield that prevents metal-to-metal contact. This added layer of durability protection reduces wear on bearings, rings, pistons, cylinders and valve trains.
Improved wear protection for durability
If you aim to keep or run your truck for years to come, Schaeffer's 700 SynShield is probably your best bet thanks to its proven wear protection. The oil has been formulated to offer high degrees of protection against wear, oxidation, and deposit formation. In terms of real-world improvements, most of the users have seen their 6.7 Powerstroke hold much better oil pressure than other 15W-40 oils, which is always good. Sure, it costs a bit more than some of the other oils, but it's worth the premium given its performance and the brand's reliability. It's suitable for use in all Powerstroke models that utilize heavy exhaust gas recirculation (EGR) and exhaust after-treatment devices such as diesel particulate filters (DPFs).
Besides being easy on the motor's internals, Schaeffer's 700 SynShield has superior low instability characteristics to control oil consumption. This basically means there is less oil loss in extreme conditions which results in efficient combustion.
- Good for long-term usage
- Improved wear protection
What's the best oil for 6.7 Powerstroke?
There are plenty of options when it comes to picking the best oil for your 6.7 Powerstroke. If you are looking to stick to products from Ford's own line-up, then, Motorcraft's SAE 5W-40 Full Synthetic Diesel Motor Oil makes sense. It offers good protection against oxidation and is specifically made for Powerstroke engines. Next up, is the Lucas Oil Magnum 15W-40 Synthetic Oil which offers reduced engine wear and oil consumption. The other option from Motorcraft, the XO-15W40 Super Duty Diesel Motor Oil works efficiently under a wide temperature range and more importantly, it minimizes engine deposits and wear. Schaeffer's 700 SynShield Durability Advantage Engine Oil , as we know, is the easiest on the motor's internals, meaning it's bound to be good for long-term usage. Lastly, we have Shell Rotella T6 fully synthetic oil that guarantees