Christmas present shopping for mom can be so challenging! Do not worry, as we have the greatest selection of DIY Christmas gifts for mom! We advise giving mom a gift that you literally hand-crafted particularly for her because it’s true what they say about homemade gifts coming from the heart.
A homemade gift is a guaranteed method to demonstrate to the receiver that you took the time, care, and effort to make their present. You’ve taken the effort to produce something with your own two hands in addition to taking the time to obtain the materials for a DIY project.
We compiled a list and chose what we believe to be the greatest Christmas presents for mom. Please feel free to look through everything as you might find the perfect Christmas present for your mother there!
Best DIY Christmas Gifts For Mom That Are Cheap, Unique & Fun
You’ll love making these DIY Christmas gifts for mom because they’re easy to make and inexpensive. - giftOMG
1. DIY Knit Sweater
Look no further if you’re looking for a chic wrap that will keep your mother toasty on frigid winter nights. Today, we’re providing a really simple guide for making a stylish wrap with light sweater knit fabric and buttons.
Naturally, you’ll need sewing knowledge and a sewing machine to do this project independently. In contrast, if you’re not up for the challenge, you may definitely get away with purchasing a knit sweater from the store because your mother will still adore it even though she knows it was made by you!
# Material:
- 1 yard of sweater knit material
- A scrap
- 5-7 wooden buttons
- 2 feet of suede cord
- Coordinating thread
- Needle
- Scissors
- Sewing machine
# How to make
Step 1: First, cut and hem the knit fabric for your sweater.
In order to hem the entire perimeter by hand and conceal the raw edges, cut the fabric to 45 by 27 inches for a size small. Cut it to 50 x 32 inches and hem it in the same manner if you want to make a size medium. A big should measure roughly 55 by 37. Before hemming, be sure to drape the fabric over yourself to ensure that it fits properly.
Step 2: Stitch your buttons on the right side’s shorter end.
With the use of safety pins, spread them out evenly along that edge. Each one should be stitched to the fabric using brown thread. For a reference on the layout, see the third image.
Step 3: Make your button loops.
- Cut a piece of suede that is about three inches long and one inch square of burlap fabric. In order to make sure that one of your buttons can easily slide through it, loop it and hold it with the cloth as shown above.
- With the loop facing up, tack it to the top left corner opposite the buttons. Four additional loops should be pinned to the right with the same spacing as the buttons, after measuring the distance between your buttons.
- Each square’s border should be sewn using a broad zigzag stitch. To avoid breaking your needle, stitch slowly when you pass over the suede cord.
- Trim all of your extra threads before sewing the additional loops to the right of this one. Then you’re done!
2. DIY Seed Bead Necklace
Seed bead necklaces are DIY Christmas gifts for mom that are amazing, and this particular one is lovely. It’s an effortless way to express your love and caring with a stunning necklace that’s also incredibly simple to make. Furthermore, your mother could only need the seed beads to fall in love with you once more!
It’s a fairly simple craft to construct, but you will need some practice with the round-nose pliers. Other than that, making the necklace shouldn’t be that challenging.
# Materials:
- seed beads
- eye pins
- head pins
- chain
- pliers
- round-nose pliers in 2 sizes
- pliers
# How to make a seed bead necklace
DIY Seed Bead Necklace – How to Make a Statement Jewelry Piece
Step 1: String the beads
Get the head pins and the seed beads ready, and then let’s begin so that they are all set to go. The idea is to use the color of the beads to form a V shape.
There will be 11 head pins filled with beads, all except one of which will be doubled. Therefore, we’ll have five sets of head pins strung together with beads and one independent pair.
One light blue bead will be your first, then eight dark blue beads, one white bead, and one more light blue bead.
The number of the light blue beads will rise as we continue adding them following the white bead. Four light blue beads will be on two of the pins, six will be on two, eight will be on two, ten will be on two, and fourteen will be on the last pin.
Step 2: Roll the head pins
The wire must then begin to roll on the head pins. Grab the round-nose pliers, then take each headpin out individually. Turn the wire to form a loop by positioning the pliers’ noses just above the spot where the seed beads are located. Be sure to trim the extra wire before completing the loop.
Grab a pair of pliers and trim the extra wire in the headpin. The wire should be turned continuously until a loop is formed. You can keep spinning the wire even if your estimation of the distance to the beads was inaccurate.
Step 3: Create the necklace
You must carefully arrange the pins in this pattern if you want to make anything attractive. First, we affixed a pin to the necklace with four light blue seed beads. A pin with six light blue beads was next added, followed by a dark blue bead, and so on.
After each headpin, don’t forget to apply the dark blue bead.
The pattern will look nicer and be more cleanly executed if the loops at the end of the head pins are rolled as near to the beads as feasible. Additionally, the number of beads will determine the length of the pins rather than how long you let the wire be. The design will become more symmetrical as a result.
Step 4: Attach the chain
Grip the chain and also push one of the eye pin’s links. Get your round-nose pliers after cutting a little portion of the eye pin wire using your pliers. Using the pliers, bend the wire, and then create a loop. After you’ve pushed the chain link to the desired location, you want to shut the loop.
Next, flip the necklace over and unlatch the eye pin’s loop with the round-nose pliers. Using the same round-nose pliers, insert the link from the opposite end of the chain into the loop and then secure it.
3. DIY Dreamcatcher
People often use dream catchers as protection from nightmares. These woven-string hoops are used as charms for babies’ protection since they are believed to resemble delicate spider webs. We decided to make a dreamcatcher since we think they are particularly endearing.
Anyone could purchase what they need without having to spend too much money in order to please their mother because the materials needed are simple and affordable. Additionally, your mom will be able to hang the dreamcatcher in any part of the house or in her bedroom.
# Materials
- Metal hoop
- Purple yarn
- White twisted yarn
- Strass
- White and purple silk ribbon
- Artificial flower
- Scissors
- Hot glue
# How To Make A Dreamcatcher
How To Make A Dreamcatcher – Easy and Beautiful
Step 1: Glue the yarn into the metal hoop
Cut a long piece of yarn to begin. As you don’t want to add a piece later, make sure you leave room for error. Start looping the yarn around the metal hoop after applying some hot glue. Once you’ve coated the previous layer with hot glue, keep adding more.
Make careful to tie a knot once you’ve finished wrapping the yarn. You could also use a tiny dab of hot glue to hold it in place. Any surplus yarn should be cut off, then it should be untangled from the hoop.
Step 2: Start Creating Loops
Make a tight knot with the white twisted yarn. Continue on a little bit after leaving just enough yarn for a tiny loop. Repeat the technique by passing the yarn under the first thread. Make sure the loops are spaced evenly apart.
Carry the thread downward once the initial set of loops is complete. Each loop should be threaded with yarn. A shaky dreamcatcher will result from pulling too tightly or too loosely, so find the right balance.
Carry the loops until there is just a tiny circle left in the center. For the thread’s security, tie a knot. You prevent the knot from moving, make careful to tie it as closely as you can to the thread.
Step 3: Decorating the dreamcatcher
You can start embellishing the dreamcatcher now that the base is complete. Silk ribbons in the colors white and purple will be used. These ribbons will be used to secure them to the bottom of the dreamcatcher. Fold the fabric according to how long you want the flowing ribbons to be. Cut four of these to a size that is close to uniform.
Select the area where you wish to hang the dreamcatcher from and mark it as the top. Locate the two lowest surrounding loops by moving to the other side of this location. One of the ribbons should be taken, folded in half, and inserted through a hole. Then, like in the drawings, pull the ends through the loop.
Once you have a different pattern, repeat the technique with the other three ribbons. The midpoint of the lower portion of the dreamcatcher will be marked by two ribbons in one loop and two in the other.
Retrieve your scissors and trim the ends of the ribbon to be about the same size. The dreamcatcher will look more balanced as a result.
Find the balance point at the top with a spare ribbon that has been cut. In order to hang the dreamcatcher, leave a loop after you tie a knot in the ribbon and push it through that space. This loop can be as big as you like it to be, depending on your demands
Source: https://giftomg.com/diy-christmas-gifts-for-mom/ - GiftOMG
Our e-commerce website: Tshirtatlowprice